Directional Coupler Maximum Ratings Storage Temperature Permanent damage may occur if any of these limits are exceeded. • internal load, no external components required +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Reel Size_Devices/Reel_ Directional Coupler Electrical Specifications Outline Drawing Suggested Layout, Tolerance to be within ±.002 Demo Board MCL P/N: TB-356 Suggested PCB Layout (PL-213) VSim DENOTES COPPER LAND PATTERN FREE OF SOLDER MASK L= 40-400 MHz M= 400-500 MHz U= 500-1000 MHz 1. Mainline loss includes theoretical power loss at coupled port. Typical Performance Data Electrical Schematic DIRECTIONAL COUPLER (DC SHORT TO GND)* ■ ELECTRICAL SCHEMATIC IS FOR DIRECTIONAL COUPLER WITH INTERNAL TRANSFORMER(S) AND EXTERNAL TERMINATION. A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, ''Standard Terms'1); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]