
Surface Mount • Low mainline loss, 0.4 dB CASE STYLE: CD542 Mini-Circuits’ ADC-20-132+ is a surface-mount directional coupler providing 20 dB coupling from 100 to 1300 MHz. This model, provides good coupling flatness, low mainline loss, high directivity and RF input power handling up to 4W. The unit comes housed in a miniature 6-lead plastic package (0.27 x 0.31 x 0.11”), saving space in dense PCB layouts. A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please vist Mini-Circuits' website at www.minicircuts.com/MCLStore/terms.jsp www.minicircuits.com PO. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
Open the catalog to page 1Surface Mount Maximum Ratings Permanent damage may occur if any of these limits are exceeded. • aqueous washable Generic photo used for illustration purposes only CASE STYLE: CD542 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Reel Size_Devices/Reel_ Outline Drawing 1. Mainline loss includes theorectical power loss at coupled port. Demo Board MCL P/N: TB-05 Suggested PCB Layout (PL-095) Y77/\ DENOTES COPPER LAND PATTERN FREE OF SOLDER MASK Electrical Schematic * ELECTRICAL SCHEMATIC IS FOR DIRECTIONAL COUPLER WITH...
Open the catalog to page 2Typical Performance Data Directivity Frequency Mainline Loss Coupling In-Out In-Cpl A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions...
Open the catalog to page 33 Pages
1 Page
1 Page
1 Page
1 Page
3 Pages
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
4 Pages
4 Pages
4 Pages
4 Pages
4 Pages
4 Pages
4 Pages
1 Page
1 Page
1 Page
1 Page
4 Pages
1 Page
2 Pages
1 Page
1 Page
1 Page
2 Pages
1 Page
3 Pages
1 Page
1 Page
1 Page
2 Pages
1 Page
1 Page
1 Page