Surface Mount • power handling up to 4 Watt. • aqueous washable • VHF/UHF receivers +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Reel Size Outline Drawing Suggested Layout, Tolerance to be within ± .002 Demo Board MCL P/N: TB-05 Suggested PCB Layout (PL-095) 1. Maximum input power with 2:1 VSWR (maximum) load at output port. Typical Performance Data Mainline Loss (dB) In-Out COUPLING & DIRECTIVITY —COUPLING — DIRECTIVITY .064 TRACE WIDTH, 3 PL (SEE NOTE BELOW) " NOTES: 1. TRACE WIDTH IS SHOWN FOR ROGERS RO4350B WITH DIELECTRIC THICKNESS .030“ ± .002"; COPPER: 1/2 0Z. EACH SIDE. FOR OTHER MATERIALS TRACE WIDTH MAY NEED TO BE MODIFIED. 2. BOTTOM SIDE OF THE PCB IS CONTINUOUS GROUND PLANE. DENOTES PCB COPPER LAYOUT WITH SMOBC 1-1 (SOLDER MASK OVER BARE COPPER) YZ7Z\ DENOTES COPPER LAND PATTERN FREE OF SOLDER MASK Electrical Schematic A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit's applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, ''Standard Terms'1); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits' website at www.minicircuits.com/MCLStore/terms.jsp www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]