FRANGIBLE METEOROLOGICAL Millard Towers offers a complete line of frangible meteorological masts that are safe, durable and easy to use. The design complies with ICAO and FAA frangibility requirements and has been verified through 3rd party, full-scale impact testing and FEA Modelling. Masts are made from high-grade Aluminum Alloy and suitable for the most extreme environmental conditions with high wind, ice, UV and saltwater exposure. + ICAO ANNEX 14 + FAA AC 150/5345-45C + Transport Canada TP312 ICAO DOC 9157, PART 6: 1.3.6 and 2.1.12: Approach Light frangibility standards should be applied to AWOS / Anemometer masts as they are located in the operational area of an airfield. 5.2.8: Navigational aids having an overall height over 1.20m should be verified for frangibility by dynamic testing. Tests should be conducted with a vehicle-driven impactor. 5.3.1: Full-scale testing is complex and costly; however, it is the manufacturer’s responsibility to carry out these tests. KEEPING THE WORLD ON COURSE SINCE 1951

TECHNICAL SPECIFICATIONS SPECIFICATION Wind Sensors TYPICAL APPLICATION QTY OF SECTIONS POWDER COATING COLOUR STANDARD MOUNT TOTAL WEIGHT (kg) A 6.02 x7 Bands of Orange Orange Orange/White 60mm OD Pipe 60mm OD Pipe 60mm OD Pipe 10 COMPLIANCES / CERTIFICATIONS 10.05 x7 Bands of Orange/White 60mm OD Pipe MAX FOUNDATION LOADS: VERTICAL (kg) B HORIZONTAL (kg) DIMENSIONS (m) - SLAB ANCHOR BOLT SPACING (mm) SHAPE ANCHOR BOLT SIZE BOLT FINISH MATERIALS ALUMINUM ALLOY 6061 HARDWARE - STAINLESS STEEL304 HARDWARE - HD GALVANIZED ANCHORS ASTM (multiple) ASTM F593 ASTM F2329 TREATMENTS / FINISHING POWDER...

MAST ACCESSORIES LED OBSTRUCTION LIGHT PART NO: _OL-1 POWER: 120V-240V LAMP: LED Red SPEC: ICAO, FAA, CAR OPTIONS: S = Single Lamp D = Double Lamp INCLUDES: Obstruction Light, Mounting Adaptor PART NO: LK-_ _ _A SPEC: UL OPTIONS: 900 = 10m Design 525 = 6m Design 300 = 2.25m / 3m Designs INCLUDES: Air Terminal + Mount, Down Conductor + Stand-offs, Bimetallic Connector, Below Grade Conductor, Ground Rod + Clamp MOUNTING CROSSARM ELECTRICAL CABLE PROTECTION PART NO: XARM-015 LENGTH: 1.50m MATERIAL: AL 6061-T6 FINISH: Orange Powder Coating WIND SENSOR MOUNT: 19 to 60mm OD UNIVERSAL MOUNT PART NO:...

FRANGIBLE METEOROLOGICAL AWOS + ANEMOMETERS + RVR + LLWAS DESIGN WIND AND ICE LOADS CUSTOM LOAD AND DESIGN ENGINEERING AVAILABLE MAX WIND SPEED (km/h) 0 NOTE: Maximum wind speed is calculated based on the Effective Projected Area (EPA) in m2 at the top of the mast. Always confirm design with a Millard engineer. ORDERING INFORMATION MAST ASSEMBLY FB - Fixed Base TB - Tilt Base 1 CH - Center Hinge 2 OBSTRUCTION LIGHT ELECTRICAL CONDUIT 1.50m CROSSARM UNIVERSAL MOUNT REMOVABLE WINCH "x" OPTIONS S = Single Lamp D = Double Lamp 300 = 2.25m/3.00m Heights 525 = 6m Height 900 = 10m Height 1 = 25mm (1")...