The BG20 Gun Barrel Bore Gauge System The BG20 has been specifically designed to modernise and improve the inspection routines of large calibre barrels. About AGI AGI is backed by 30 years of experience in the design, development, manufacture and installations of defence systems and provides full Integrated Logistic Support services, training, installation and documentation. AGI is accredited to International Quality Standards ISO 9001/BS5750 Part 1 and Tick-It software procedures. The gauge may be introduced into the breech or muzzle end of the barrel and the measuring head located anywhere along its length. The measuring process can be effected in minutes. The BG20 is supported by a Software Analysis Package which is PC based, allowing a range of barrel and measurement data to be down-loaded directly from the gauge, via the integral RS232 serial port, onto the PC for presentation in tabular or graphical format. The Bore Gauges are supplied in a rugged carrying case affording protection, storage and ease of transportation. In the Normal mode of operation, horizontal and vertical measurements, at a particular location, give rise to an indicated average bore dimension. In Ovality mode, two additional (45º) measurements are taken allowing the gauge to compute the maximum out-of-roundness, or ovality figure. The system is made versatile by means of an interchangeable feeder tube, thus allowing each gauge to measure a wide range of barrel types from 20-155mm in diameter. Fleets Point, Willis Way, Poole, Dorset, BH15 3SS, England Fax: +44 (0)1202 685670 E-mail: [email protected] Website: www.agiltd.co.uk

The BG10 Gun Barrel Bore Gauge System The BG10 Gun Barrel Bore Gauge System is highly recommended for applications where measurement accuracy must not be compromised by the priority for a fast operational turn-around time. AGI’s Visual Inspection Camera System For Use With AGI Gun Barrel Bore Gauges Weight: 5kg Unit Unpacked – 16kg Packed Weight: 5kg Unit Unpacked – 16kg Packed Power Supply: replaceable internal batteries (6 x AA size) Power Supply: replaceable internal batteries (6 x AA size) Battery Life: In excess of 100hrs continuous use Calibre Range: 20-60mm Repeatable Accuracy: ±5 Microns...