Model WIKA-Cal
1 / 6Pages

Calibration technology Calibration software Model WIKA-Cal WIKA data sheet CT 95.10 Applications ■■ Creation of calibration certificates for mechanical and electronic pressure measuring instruments ■■ Fully automatic calibration with pressure controllers ■■ For the recording of certificate-relevant data in combination with the CalibratorUnits of the CPU6000 series ■■ Determination of the required mass loads for pressure balances ■■ Calibration of gauge pressure measuring instruments with absolute pressure references and vice versa Special features WIKA-Cal calibration software ■■ Multicalibration of up to 7 test items possible ■■ Templates for the creation of calibration certificates and logger protocols ■■ Flexibility through individual settings ■■ Simple operation and set-up of the software ■■ SQL database independent from Microsoft® Access® Description Creation of calibration certificates or logger protocols The WIKA-Cal calibration software is used for generating calibration certificates or logger protocols for pressure measuring instruments and is available as a demo version for a cost-free download. Calibration certificates can be created with the Cal-Template and logger protocols can be created with the Log-Template. In order to switch from the demo version to a full version of the respective template, a USB stick with the licence must be purchased. The pre-installed demo version automatically changes to the selected full version when the USB stick is inserted and remains available so long as the USB stick is connected to the computer. WIKA data sheet CT 95.10 ∙ 02/2017 Data sheets showing similar products and accessories: CalibratorUnit; models CPU6000-W, CPU6000-S and CPU6000-M; see data sheet CT 35.02 Modular pressure controller; model CPC6050; see data sheet CT 27.62 High-end pressure controller; model CPC8000; see data sheet CT 28.01 Pneumatic pressure balance; model CPB5000; see data sheet CT 31.01 Hydraulic pressure balance; model CPB5800; see data sheet CT 31.11 User-friendly and flexible through templates A template is a prepared document. Immediately after selecting the template, all documents will be clearly displayed in a database. When the user generates a new document with the template, he will be guided through the creation process in a document view. Meanwhile, the software retrieves previously created information from an SQL database and adds further data during the certificate generation. Microsoft® and Access® are registered trademarks of Microsoft Corporation in the Unit

The process of the certificate generation adapts to the requirements of the user. Through the rules for the template, the user only sees the required or possible entries. If only one entry is possible, this is selected directly and it proceeds to the next step. This process increases the quality and productivity of document creation. Incorrect entries are eliminated and through the automatic selection, the process is accelerated. The complexity is reduced to a minimum through the selection limitations and clearly displayed in the document overview. The result of the document view is stored...

Cal-Template calibration certificate With the Cal-Template, calibration certificates for mechanical and electronic pressure measuring instruments can be generated. The calibration certificates have a format derived from the WIKA DKD calibration certificate and contain the same functions and calculations. The template has many additional features. Thus, for example, customer-specific information such as the company logo, the address, the contact or individual labelling can be adjusted by the user. It is therefore flexible and can be used to meet the needs of the customer. After creating a...

Log-Template logger protocol The Log-Template can generate logger protocols, which can be used for recording data. As with the Cal-Template, the user is guided through the document view and arrives at the end with a completed protocol from the logged data as a PDF/A document. The data in the PDF/A document is also available as a CSV file for processing in another program, such as Microsoft® Excel®. Microsoft® and Excel® are registered trademarks of Microsoft Corporation in the United States and other countries. Log Demo Creation of data logger test reports, limited to 5 measured values. Log...

Calibrate electrical pressure measuring instruments with WIKA-Cal, CPU6000 and pressure balance Pressure balances offer the highest accuracy as references for the calibration of pressure measuring instruments. With WIKA-Cal, not only the test items are read automatically, but also the masses to be applied for the measuring points are determined. The program displays, for each measuring point, which masses have to be applied and thereby corrects the pressure value, depending on the environmental conditions and the piston temperature, to achieve the highest accuracy. With the different...

© 09/2013 WIKA Alexander Wiegand SE & Co. KG, all rights reserved. The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. Page 6 of 6 WIKA data sheet CT 95.10 • 02/2017 WIKA Alexander Wiegand SE & Co. KG Alexander-Wiegand-StraRe 30 63911 Klingenberg/Germany Tel. +49 9372 132-0 info@wika.de www.wika.de