Calibration technology High-end pressure controller Model CPC8000 mensor WIKA data sheet CT 28.01 High-end pressure controller, model CPC8000 Applications ■ Industry (laboratory, workshop and production) ■ Transmitter and pressure gauge manufacturers ■ Calibration service companies and service industry ■ Research and development laboratories ■ National institutes and institutions Special features ■ Pressure ranges: -1 ... 400 bar / -15 ... 6,000 psi ■ Pressure type: positive and negative gauge pressure, absolute pressure ■ Up to three integrated, interchangeable reference transducers ■ Control stability 0.002 % of the span ■ Accuracy down to 0.008 % IS (IntelliScale) ■ Precision 0.004% FS Description Application The CPC8000 high-end pressure controller provides always an appropriate calibration solution on account of its accuracy class (see specifications). Its outstanding control performance is particularly impressive, thanks to special, patented valve technology and the specific pressure transducer as a measuring unit. With this the controller is suitable as a factory or working standard for the testing or calibration of any type of pressure measuring instrument. Design The CPC8000 is available as a desktop instrument or as a 19" rack-mounted unit. The transducers can be changed via the front, without taking out the complete controller (e.g. out of a calibration rig). Functionality Maximum ease-of-use is achieved through the large touchscreen and the simple and intuitive menu navigation. In addition, its operation is further supported by the availability of a large number WIKA data sheet CT 28.01 • PN 0019649001B • 07/2017 of menu languages. On the large touchscreen, all necessary information such as current measured value and set point can be found on a single screen. Optionally, the measured values can be displayed in other pressure units additionally. The pressure controller can be remotely controlled via serial interfaces available. Through these, a wide range of emulation command sets for other pressure controllers are available. Complete test and calibration systems On request, complete mobile or stationary test systems can be manufactured. There is an IEEE-488.2, RS-232 or USB and an Ethernet interface for communication with other instruments, and thus the instrument can be integrated into existing systems.

Model CPR8000 Standard Optional Accuracy 1 Gauge pressure Bi-directional Absolute pressure 4) Precision 5) Calibration Interval 365 days 6) 365 days Calibration Interval 365 days 365 days Optional barometric reference Function The barometric reference can be used to switch pressure types 9) (absolute <=> gauge). With gauge pressure transducers, the measuring range of the transducers must begin with -1 bar / -15 psi in order to carry out an absolute pressure emulation. Measuring range 552 ... 1,172 mbar abs. / 8 ... 17 psi abs. Pressure units 38 and 2 freely programmable...

8) Warning! This is class A equipment for emissions and is intended for use in industrial environments. In other environments, e.g. residential or commercial installations, it can interfere with other equipment under certain conditions. In such circumstances the operator is expected to take the appropriate measures. 9) Calibration in a horizontal position. Approvals and certificates, see website WIKA data sheet CT 28.01 • 07/2017

Modular design of the CPC8000 Due to the modular transducer design, the large pressure range of up to 400 bar / 6,000 psi and the ability to exchange the transducers through the front, the CPC8000 high-end pressure controller brings a maximum degree of flexibility in terms of hardware design or a subsequent transducer expansion. Up to three precision pressure transducers possible The controller offers at least one precision pressure transducer (optional are two or three), whose calibration data is stored in the transducer (for available ranges, see specifications). The five basic instruments,...

<—Selection: Numeric keypad, settings and favourites Input menu field (Numeric/STEP Funct./JOG Funct.) Display: integrated barometer, serial interface communication status, touchscreen lockout and warnings Selection of the active transducer or auto-range—* Pressure range of the trans—* Entered set point Current measuring value Current unit Adjustable control limits—* optionally adjustable: slew rate — optionally adjustable: currently measured slew rate Operating modes MEASURE In measure mode, the pressure present at the test port is measured with high accuracy (if you switch directly from CONTROL...

Electrical and pressure connections - rear Fan Microfuse Power connection Measure/ Control Dimensions in mm Front view Side view Rear view WIKA data sheet CT 28.01 ∙ 07/2017

WIKA-CAL calibration software Easy and fast creation of a high-quality calibration certificate The WIKA-CAL calibration software is used for generating calibration certificates or logger protocols for pressure measuring instruments and is available as a demo version for a cost-free download. A template helps the user and guides him through the creation process of a document. In order to switch from the demo version to a full version of the respective template, a USB key with the template has to be purchased. The pre-installed demo version automatically changes to the selected full version when...

■■ High-end pressure controller model CPC8000 ■■ A2LA calibration certificate (standard on factory) ■■ Pressure adapters ■■ Pressure booster ■■ WIKA-CAL calibration software Options ■■ DKD/DAkkS calibration certificate ■■ 19" rack mounting with side panels ■■ Barometric reference ■■ Additional reference pressure transducers ■■ Customer-specific system © 2003 WIKA Alexander Wiegand SE & Co. KG, all rights reserved. The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials....