MODEL CPC7000
9Pages

Calibration technology Pneumatic high-pressure controller Model CPC7000 WIKA data sheet CT 27.63 Applications ■■ Healthcare and avionics industry ■■ Industry (laboratory, workshop and production) ■■ Transmitter and pressure gauge manufacturers ■■ Calibration service companies and service industry ■■ Research and development laboratories Special features ■■ Pressure ranges: 0 ... 700 bar (0 ... 10,000 psi) ■■ Control speed 30 s ■■ Accuracy down to 0.01 % IS (IntelliScale) Pneumatic high-pressure controller, model CPC7000 Description Version The CPC7000 pneumatic high-pressure controller always provides a suitable calibration solution on account of its accuracy class. Its outstanding control performance is particularly impressive thanks to special valve technology and the high-accuracy pressure sensor as a measuring unit. With this the controller is suitable as a factory or working standard for the testing or calibration of any type of pressure measuring instrument. Design The CPC7000 is available as a desktop instrument or as a 19" rack-mounting kit. The sensors can be changed via the front, without having to take out the complete controller, e.g. out of a calibration rig (plug-and-play). Functionality The touchscreen, through its intuitive user interface, delivers ease of use. The large number of menu languages adds to its user friendliness. In addition to specifying a specific pressure set point, either by entering it via touchscreen or sending it via remote interface, the pressure can be changed in defined, WIKA data sheet CT 27.63 ∙ 01/2017 Data sheets showing similar products and accessories: Modular pressure controller; model CPC6050; see data sheet CT 27.62 High-end pressure controller; model CPC8000; see data sheet CT 28.01 WIKA-CAL calibration software; see data sheet CT 95.10 programmable steps by using the STEP buttons. Moreover, the user can also easily create extensive test programs using the instrument menu. Depending on the application, the control rate can be set as a user-defined variable rate. Software The WIKA-CAL calibration software enables the convenient calibration of pressure measuring instruments and the generation of test certificates. Additionally, the instrument can also be remotely controlled using the serial command formats, the Mensor standard, SCPI or further optional command sets are available. Complete test and calibration systems On request, complete mobile or stationary test systems can be manufactured. There is an IEEE-488.2, RS-232, USB and an Ethernet interface for communication with other instruments, and thus the instrument can be integrated

WIKA data sheet CT 27.63 • 01/2017

Basic instrument Control parameters WIKA data sheet CT 27.63 • 01/2017

Modular design of the CPC7000 Due to the modular sensor design, the large pressure range of 0 ... 700 bar (0 ... 10,000 psi) and the ability to exchange the sensors through the front, the CPC7000 pneumatic pressure controller brings a maximum degree of flexibility in terms of hardware design or a subsequent sensor expansion. Up to three precision pressure sensors possible The CPC7000 offers at least one precision pressure sensor (also optional two or three), whose calibration data is stored in the sensor. In one controller, either absolute or gauge pressure sensors are possible. With two or...

Shortly after power-up, the standard home screen (see following figure) is displayed. In this menu screen, one can switch between the operating modes using the buttons MEASURE ©. CONTROL © and VENT (TT) at the bottom of the screen. Q Home application Q General settings Q Control settings Q Display configuration Q Remote control settings @ Step settings Q Sequences settings Favourites @ Navigation within the menu @ VENT Immediately vents the system, including the test assembly connected to the Measure/Control port, to atmosphere. @ CONTROL In control mode the instrument provides a highly...

19" rack-mounting kit with side panels Front view II WIKA data sheet CT 27.63 • 01/2017

1 Optional: Barometric pressure connection (M12 female thread) 2 Digital I/O 1-3 3 Reference connection (M12 female thread) 4 Fan 5 IEEE-488 interface 6 RS-232 interface 7 Ethernet port 8 Power supply 9 USB interface (instrument) for remote communication 10 USB interface (host) for service 11 Vent pressure reference incl. silencer 12 Measure/Control port (M16 x 1.5 female with sealing cone) 13 Vent incl. silencer (ATM) 14 Controlled vent incl. silencer (ATM) 15 Supply port (M16 x 1.5 female with sealing cone) 16 Digital I/O 4-6 WIKA data sheet CT 27.63 • 01/2017

WIKA-CAL calibration software Easy and fast creation of a high-quality calibration certificate The WIKA-CAL calibration software is used for generating calibration certificates or logger protocols for pressure measuring instruments and is available as a demo version for a cost-free download. A template helps the user and guides him through the creation process of a document. In order to switch from the demo version to a full version of the respective template, a USB stick with the template must be purchased. The pre-installed demo version automatically changes to the selected full version...

■■ Modular pressure controller model CPC7000 (desktop case) ■■ Power cord with 1.5 m (5 ft) ■■ Operating instructions ■■ Factory calibration certificate ■■ Pressure booster for high-pressure supply ■■ WIKA-CAL calibration software Options ■■ DKD/DAkkS calibration certificate ■■ Barometric reference ■■ Max. 2 further references (CPR8050 or CPR8000) ■■ 19" rack-mounting kit with side panels ■■ Customer-specific system ■■ Adapters and fittings for pressure connections Ordering information Model / Case type / Instrument version / Reference pressure sensor 1 / Reference pressure sensor 2 /...