Model CPC6050
8Pages

Calibration technology Modular pressure controller Model CPC6050 WIKA data sheet CT 27.62 Applications ■■ Healthcare and avionics industry ■■ Industry (laboratory, workshop and production) ■■ Transmitter and pressure gauge manufacturers ■■ Calibration service companies and service industry ■■ Research and development laboratories Special features Modular pressure controller, model CPC6050 ■■ Pressure ranges: -1 ... 210 bar (-15 ... 3,045 psi) ■■ Control speed 15 s ■■ Control stability < 0.003 % FS (typical 0.001 % FS) ■■ Accuracy down to 0.01 % IS (IntelliScale) ■■ Precision 0.004 % FS ■■ Two year warranty Description Design The highly configurable CPC6050 modular pressure controller offers maximum flexibility to best suit the customer’s requirements. The instrument can have up to two independent pressure regulating channels which can operate simultaneously. Each channel can have up to two transducers. The instrument can also have an optional barometric reference for gauge or absolute pressure emulation. This instrument can be specified as a desktop or as a 19” rack-mounted device. Application The controller offers many applications within calibration laboratories and production environments because of its pressure range -1 … 210 bar (-15 … 3,045 psi) and accuracy down to 0.01% IS-50. Its ability to control pressures as low as 25 mbar (10” of H20) with a high stability makes it the ideal calibration and verification solution for healthcare and aerospace industries. Simultaneous calibration channels along with interchangeable plug-n-play pressure transducers and an intuitive GUI makes CPC6050 an easy-to-use and maintain instrument. Functionality The touchscreen, along with an intuitive user interface, provide maximum ease-of-use. The large number of menu languages add to its operability. In addition to specifying a certain pressure set point either by entering it via touchscreen or sending it via remote WIKA data sheet CT 27.62 ∙ PN 0019646001D ∙ 07/2017 Data sheets showing similar products and accessories: Pneumatic precision pressure controller; model CPC6000; see data sheet CT 27.61 High-end pressure controller; model CPC8000; see data sheet 28.01 WIKA-CAL calibration software; see data sheet CT 95.10 interface. The pressure can be changed in defined, programmable step sizes by using the STEP buttons. Moreover, the user can also easily create extensive test programs using the instrument menu. Depending on the application, the rate of control can be either pre-set precision, high-speed or a user defined variable rate. Software The WIKA-CAL calibration software enables the convenient calibration of pressure measuring instruments and the generation of test certificates. Additionally, the instrument can also be remotely controlled using the serial command formats, the Mensor standard, SCPI or further optional command sets are available. Complete test and calibration systems On request, complete mobile or stationary test systems can be manufactured. There is an IEEE-488.2, RS-232, USB and an Ethernet interface for communication with other instruments, and thus the instrument can be integrated into existing systems. Backward Compatibility The highly configurable CPC6050 can also be used with pressure transducers of its predecessor model CPC6000. The transducers can be used individually or together with the CPR6050, hence providin

Pressure range Accuracy 1 Gauge pressure Precision 5) Calibration interval Optional barometric reference Function Measuring range Accuracy 1) Pressure units The barometric reference can be used to switch pressure types 7), absolute <=> gauge. With gauge pressure transducers, the measuring range of the transducers must begin with -1 bar (-15 psi) in order to carry out a complete absolute pressure emulation. 552 ... 1,172 mbar abs. (8 ... 17 psi abs.) 0.01 % of reading 39 and two freely programmable 1) It is defined by the total measurement uncertainty, with the coverage factor (k = 2) and...

SVR module 8) < 0.003 % FS of the active range (typical 0.001 % FS) precision, high speed and custom 15 s 10) 0 ... 100 % FS 0.0017 bar (0.025 psi) over exhaust pressure or 0.05 % FS, whichever is greater < 0.15 % FS in high speed control mode (typical <0.05% FS in precision control mode) 50 ... 1,000 ccm Control parameter Control stability Control mode Control time Control range Minimum control pressure Overshoots Test volume LPPump module < 0.003 % FS of the active range (typical 0.001 % FS) external supply on / off 9) 25 s 10) 0 ... 100 % FS 0.0034 bar (0.05 psi) over exhaust pressure or...

Modular design of the CPC6050 Up to two independent control channels The CPC6050 provides a high degree of flexibility by having two independent channels of operation within one instrument. This enables the user to perform two separate calibrations at the same time. The user can also perform delta function on the two channels to see the differential pressure. Each channel is equipped with its own pressure module and up to two pressure transducers. The CPC6050 offers two different types of pressure modules, SVR module and LPPump module. The SVR modules are based on a special solenoid valve...

Easy operation via touchscreen Shortly after power-up, the standard main screen (see following picture) is displayed. In this menu screen, one can switch between the operating modes using the buttons MEASURE ©, CONTROL © and VENT (© at the bottom of the screen. Measure Control Vent Measure Control Vent (© Home application (© General settings © Control settings © Display settings © Remote settings © Step settings © Sequence settings © Favorites © Barometric pressure reading (optional) © Menu navigation (forward/ back) © VENT Immediately vents the system, including the test assembly...

Dimensions in mm (in) Desktop case Front view Side view (left) 19" rack-mounting kit, front view Electrical and pressure connections - rear view 1 Digital I/O or Automatic CPS connector 2 Exhaust port (7/16-20 UNF) 3 Fan 4 Barometric reference port (10-32 UNF) 5 IEEE-488 interface 6 RS-232 interface 7 Instrument label 8 Ethernet port 9 Power supply 10 USB interface (instrument) for remote communication 11 USB interface (host) for service 12 Vent (ATM) 13 Reference port (7/16-20 UNF) 14 Measure/Control port (7/16-20 UNF) 15 Supply port (7/16-20 UNF) WIKA data sheet CT 27.62 • PN...