Rugged LVDT with guide & swivel joints CER
3Pages

{{requestButtons}}

Catalog excerpts

Rugged LVDT with guide & swivel joints CER - 1

Aerospace Energy Measurement Railway Characteristics • Rugged (integration of 012mm sensor in 020mm housing) • Very high reliability, excellent repeatability • Ball-and-sockets at each extremity • Protection IP67 • Delivered with a 15 meter cable Applications • Valve position measurement • Servo-actuator position feedback • Fire system remote control • Steam turbine servo-valve control • Vapocracker valve control Meggitt (Sensorex) CER consists of a LVDT mounted within a sealed housing with a shaft bearing. Either end can be fixed with a ball-and-socket joint. The unit is made from stainless steel and is classed IP67. CER sensor is particularly rugged and is designed for severe environment applications. This sensor is an AC/AC LVDT; it shall be used with a conditioning unit model SX3120, SX9130... All our signal conditioners are detailed in chapter “electronic conditioners”. MEGGiTT smart engineering for extreme environments Meggitt Sensing Systems Our measurement product competencies: LVDTs I Inertial systems I Inclinometers I Accelerometers I IMU I MEMS sensors I Servo-inclinometer I Conditioners

Open the catalog to page 1
Rugged LVDT with guide & swivel joints CER - 2

Aerospace Energy Measurement Railway Sensorex'Rugged LVDT with guide & swivel jointsCER Contact Meggitt (Sensorex) Archamps Technopole 196 Rue Louis Rustin 74166 ARCHAMPS- France Tel: 04 50 95 43 70 Fax: 04 50 95 43 75 www.sensorex.fr www.meggitt.com Environmental characteristics Operating temperature -40°C / +80°C MEGGiTT smart engineering for extreme environments Meggitt Sensing Systems Our measurement product competencies: LVDTs I Inertial systems I Inclinometers I Accelerometers I IMU I MEMS sensors I Servo-inclinometer I Conditioners

Open the catalog to page 2
Rugged LVDT with guide & swivel joints CER - 3

Aerospace Energy Measurement Railway Sensorex' Rugged LVDT with guide & swivel joints CER General specifications at +25°C Nominal electrical stroke ±3mm to ±150mm Primary supply voltage 2.2Vrms nominal Non linearity error < 0.3% of Full Scale Zero null voltage < 0.5% of Full Scale Sensitivity thermal drift < 500ppm/°C Contact Meggitt (Sensorex) Archamps Technopole 196 Rue Louis Rustin 74166 ARCHAMPS- France Tel: 04 50 95 43 70 Fax: 04 50 95 43 75 www.sensorex.fr www.meggitt.com Selection guide Nominal electrical stroke (mm) Product reference Meggitt Sensing Systems Our measurement product...

Open the catalog to page 3

All MEGGITT SENSING SYSTEM - Sensorex catalogs and technical brochures

  1. MEMS SX40000

    13 Pages