LVDT conditioner SX3120

LVDT conditioner SX3120

LVDT conditioner SX3120

Product catalog summary
Overview
Meggitt Sensing Systems specializes in various measurement products including LVDTs, inertial systems, inclinometers, accelerometers, IMUs, MEMS sensors, servo-inclinometers, and conditioners. Their products are applicable in sectors such as aerospace, energy, measurement, and railway.

Product Description
The Sensorex® SX3120 is a DIN box inductive transducer conditioner designed for LVDT, RVDT, and half-bridge applications. It features simple zero and scale adjustments using dipswitches and potentiometers. The unit is designed for easy installation and maintenance with screw terminal connections and is compatible with DIN EN 50022 tracks.

Electrical Characteristics
  • Power Supply: 15VDC to 28VDC
  • Maximum Consumption: 50mA
  • Output Signal: 0-10VDC or ±10VDC, 4-20mA
  • Phase Shift: -20° to +15°
  • Oscillator Frequency: 3.5kHz or 5kHz ±20%
  • Oscillator Sine Voltage: 1.1Veff or 2.2Veff ±10%

Mechanical & Environmental Characteristics
  • Dimensions: 115x100x23 mm
  • Box Material: Polyamide PA
  • Protection: IP 20
  • Operating Temperature: 0°C to +70°C
  • Storage Temperature: -40°C to +85°C
  • Weight: Approximately 130 g

Performance Specifications
  • Maximum Gain: 33
  • Minimum Gain: 0.2
  • Bandwidth: 400Hz
  • Non-linearity: ±0.04% of FS max
  • Electrical Noise: 15mV (peak to peak)

Contact Information
Meggitt (Sensorex)
Archamps Technopôle
196 Rue Louis Rustin
74166 ARCHAMPS, France
Tel: 04 50 95 43 70
Fax: 04 50 95 43 75
Website: www.sensorex.fr, www.meggitt.com
See more

Catalog excerpts

LVDT conditioner SX3120-1

Aerospace Energy Measurement Railway • Power supply 24Vdc • Transducer excitation - Frequency 3.5kHz or 5kHz - Sine voltage 1.1Veff or 2.2Veff • Output signal 0/10V or ±10V and 4-20mA • Phase shift -20° to +15° • Synchronization master/ slave Contact Meggitt (Sensorex) SX3120 module is an inductive transducer conditioner (LVDT, RVDT and half bridge). This module has a very simple and practical zero and scale adjusting with dipswitch and potentiometers. Connections for power supply, transducer and output signals are made by screw terminals to facilitate maintenance and installation. This industrial unit in polyamide PA PHOENIX type EM may be plugged into any common DIN EN track (EN 50022 standard). Sine Voltage Generator Input Stage --j pEjff " Output Stage Meggitt Sensing Systems Our measurement product competencies: LVDTs I Inertial systems I Inclinometers I Accelerometers I IMU I MEMS sensors I Servo-inclinometer I Conditioners MEGGiTT smart engineering for extreme environments

 Open the catalog to page 1
LVDT conditioner SX3120-2

Aerospace Energy Measurement Railway Sensorex® DIN box inductive transducer conditioner SX3120 Contact Mechanical & environmental characteristics Fixing polyamide PA Screw terminal Operating temperature Storage temperature Temperature stabilization time Electrical characteristics at +25°C Power supply Maximum consumption Maximum gain Minimum gain Bandwidth (2nd order filter) Voltage output Output short-circuit current (voltage output) Non linearity (voltage output) Electrical noise (voltage output) Current output Load resistor (current output) Output impedance (current output) Oscillator frequency...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.