C95510
1 / 2Pages

DATA SHEET C955I0 Materion Brush Performance Alloys' C955I0 is an Aluminum-Nickel-Bronze alloy that combines high strength, ductility, and good abrasion resistance under severe loading conditions. This material, specified as AMS 4880, is frequently used for very demanding aerospace applications, including, but not limited to: bushings, spherical and rod end bearings, rub pads, and wear strips. This material is also commonly used for applications in the oil & gas and other durable goods markets. Materion Brush Performance Alloys’ 50,000 square foot mill in Lorain, Ohio is a state-of-the-art facility which utilizes a proprietary technology process to produce the EquaCast® microstructure. This process produces an extremely uniform, fine grained microstructure and promotes excellent dispersion of alloying elements. This allows Materion Brush Performance Alloys to provide materials of unparalleled quality and consistency. C95510 (AMS 4880) offers several significant advantages over other materials available in the marketplace due to the EquaCast process: • Higher and more consistent mechanical properties: C95510 offers higher yield strength and ductility minimums on product over 1.0” (25.4 mm) according to AMS 4880. Additionally, Materion Brush Performance Alloys product offers typical mechanical property values of 20 - 30% above specification minimums. • Improved service life: C95510 (AMS 4880) offers enhanced corrosion resistance and fatigue life due to the alloy dispersion and refined, “wrought-like” microstructure. • Superior quality: Materion Brush Performance Alloys Vertical Continuous Casting Process is less likely to produce porosity than other casting methods used for manufacturing this product. • Ease of use: The machinability of C95510 (AMS 4880) has been rated superior by customers from major airframers to small machine shops. • Cost effectiveness: AMS 4880 is commonly allowed as a substitute for AMS 4640, saving weight and machining time. C955I0 C HEMICAL COMPOSITION (weight percent) Materion Brush Performance Alloys MATERION CORPORATION AD0008_0513 6070 Parkland Boulevard www.materion.com/alloys © 2013 Materion Brush Inc. Mayfield Heights, OH 44124 USA EquaCast® is a registered trademark of Materion Brush Inc. phone: 216.486.4200 fax:216.383.4005 email: BrushAlloys-Info@Materion.com

C95510 (AMS 4880) is truly a premium product at a competitive price. Standard sizes available from Materion Brush Performance Alloys are listed below. Size tolerances are specified to ASTM B505. Other sizes and shapes with outside diameters ranging from 1.0” (25.4 mm) to 17.0” (432 mm) available upon request. Full certifications supplied. For further information on C95510 material, please contact us at 800-3754205. Standard C95510 Tube Sizes North American Service Centers - Sales Inquiries For bar, tube, plate/sheet >0.060” (1.5 mm) thick and rod >0.5” (12.7 mm) diameter: Warren, MI TOLL...