Overlapping Carousel Plates

Product catalog summary

Presentation
The document presents the MHS carousel, a machine designed for luggage stacking and transport. It highlights the experience and expertise of the technicians involved in its development.

Features
The carousel features a modular structure, high-efficiency friction drive transmission, and options for stainless steel or painted casings. It is designed with reduced curves and counter-curves, scratch-resistant steel or PVC plates, and a peripheral EPDM profile closing. Assembly time is 6-8 hours per meter, with reduced costs for component optimization and maintenance.

Modular Structure
The structure is made of high-resistance painted steel carpentry, allowing for various shapes such as O, T, L, or composite. It enables two counter-curves in less than 12 meters, outperforming competitors.

Power Group
The drive unit is installed every 40 meters of chain and can operate in pairs or backup mode. It uses a friction rubber belt for silent transmission, which is pre-assembled and tested. The unit is compatible with Lenze, Sew, Nord, or other motorization upon request.

EPDM Rubber Profile
The MHS carousel does not use bottom plates, avoiding the disadvantages such as high shearing risk and frequent maintenance. The EPDM profile offers advantages like no shearing risk, limited maintenance, and reduced noise.

Catalog excerpts

Presentation Overlapping Carousel Plates Features My 2018 Material Handling Systems s.r.l. Sede Legale: Via di Vigna Jacobini, 73/a 00149 Roma (RM) – IT Iscrizione C.C.I.A.: RM – 1423410 web: www.mhssrl.com Stabilimento: Loc. Spinelle, 1 03012 Anagni (FR) - IT email: [email protected] C.F. e P.IVA: 13091941008 Tel: +39-0775-76965

Open the catalog to page 1

The MHS carousel, encloses in all its contents, the experience of the technicians who have thought, developed and produced it. It’s a machine used for the luggage stack, from transport lines in order to allow storage and transport. Main features: - Modular structure - High efficiency friction drive transmission unit - Stainless steel or painted casings for external finishing - Reduced curves and counter-curves rays - Finishing of overlapping plates: scratch-resistant steel or 6mm PVC - Peripheral EPDM profile closing - 6/8 hours per meter for assembly - Reduced costs for optimization of components...

Open the catalog to page 2

Modular Structure Modular structure made by solid high resistance painted steel carpentry, its modular structure allows to realize O, T, L or composite shapes. Further technical details can be viewed in the following attachment Material Handling Systems s.r.l. Sede Legale: Via di Vigna Jacobini, 73/a 00149 Roma (RM) – IT Iscrizione C.C.I.A.: RM – 1423410 web: www.mhssrl.com Stabilimento: Loc. Spinelle, 1 03012 Anagni (FR) - IT email: [email protected] C.F. e P.IVA: 13091941008 Tel: +39-0775-76965

Open the catalog to page 3

Modular Structure Its specific structure allows to get two counter-curves in small space: less than 12 meters. Competitors go further! Material Handling Systems s.r.l. Sede Legale: Via di Vigna Jacobini, 73/a 00149 Roma (RM) – IT Iscrizione C.C.I.A.: RM – 1423410 web: www.mhssrl.com Stabilimento: Loc. Spinelle, 1 03012 Anagni (FR) - IT email: [email protected] C.F. e P.IVA: 13091941008 Tel: +39-0775-76965

Open the catalog to page 4

Power Group The drive unit is mounted every 40 meters of chain and can operate either in pairs or in backup mode. The transmission to the chain, on which the plates are keyed, takes place by means of a friction rubber belt. The transmission is highly silent and tested. The transmission is already assembled and pre-tested by the factory. It can be manually and easily disengaged it means of the release lever also in continuous. The drive unit is suitable for Lenze motorization from the factory, Sew, Nord or other by request. Material Handling Systems s.r.l. Sede Legale: Via di Vigna Jacobini, 73/a...

Open the catalog to page 5

EPDM Rubber Profile Compared to the offer of Italian and foreign manufacturers, the MHS carousel dosn’t use bottom plates. . EPDM Profile’s advantages Compared to the plates - No risk of shearing; - Limited maintenance because there are no break elements; - More silent. Bottom Plains’ disadvantages - High risk of shearing for unqualified people the machine comes in contact with; - Major maintenance interventions due to breakage of plastic plates. Material Handling Systems s.r.l. Sede Legale: Via di Vigna Jacobini, 73/a 00149 Roma (RM) – IT Iscrizione C.C.I.A.: RM – 1423410 web: www.mhssrl.com...

Open the catalog to page 6

Material Handling Systems s.r.l. Sede Legale: Via di Vigna Jacobini, 73/a 00149 Roma (RM) – IT Iscrizione C.C.I.A.: RM – 1423410 web: www.mhssrl.com Stabilimento: Loc. Spinelle, 1 03012 Anagni (FR) - IT email: [email protected] C.F. e P.IVA: 13091941008 Tel: +39-0775-76965

Open the catalog to page 7

Open the catalog to page 8

Open the catalog to page 9

Open the catalog to page 10

Open the catalog to page 11

Overlapping Carousel Plates

Overlapping Carousel Plates

Catalog excerpts

All Material Handling Systems srl catalogs and technical brochures