- Products
- Catalogs
- News & Trends
- Exhibitions
c 12
c 12
- Traverse: X-axis 350 mm, Y-axis 440 mm, Z-axis 330 mm
- Rapid Linear Traverse: X-Y-Z 30 m/min (dynamic 50 m/min)
- Linear Acceleration: X-Y-Z 4 m/s² (dynamic 8 m/s²)
- Linear Feed Force: X-Y-Z 3000 N
- Max. Vertical Table Clearance: 430 mm
- Max. Workpiece Dimensions: Diameter Ø 320 mm, Height 265 mm
- Collision Circle: Ø 610 mm at 0° position
- Control System: Heidenhain TNC 640
- Tool Changer: Pick-up magazine with 36 items, additional ZM 35
- Chip-to-Chip Time: Approx. 4.5 seconds
- Max. Tool Dimensions: Length 200 mm, Diameter Ø 80 mm
- Max. Magazine Load: 144 kg
- Diameter: Ø 320 mm
- Swivelling Range: +/- 115°
- C-axis Drive Mode: Torque
- Swivelling Axis Speed: 25 rpm (dynamic 55 rpm)
- Rotary Axis Speed: 40 rpm (dynamic 80 rpm)
- Max. Table Load: 100 kg
- Speed and Power: Various configurations from 12000 rpm to 42000 rpm with power ranging from 31 kW to 37 kW
- Torque: Ranges from 17.5 Nm to 98 Nm
- External Cooling Lubricant Supply: Positional uncertainty 0.008 mm
- Internal Cooling Lubricant Supply: Includes paper band filter
- Chip Management: Removable chip slide, scraper belt or hinge conveyor
- Hydraulics: Operating pressure 120 bar
- Central Lubrication: Minimum grease lubrication quantity
- Power Consumption: 46 kVA
- Compressed Air: 6 bar
- Weight: Approx. 7.2 tons
- Products are subject to German Export Law and require authorization due to precision capabilities.
Catalog excerpts
Traverse Traverse Rapid linear traverse (dynamic) X-axis Y-axis Z-axis X-Y-Z Linear acceleration (dynamic) X-Y-Z Linear feed force X-Y-Z Max. vertical table clearance Max. workpiece diameter Max. workpiece height Collision circle (A axis) in 0° position Main spindle drive Main power/Torque Speed Main power/Torque Speed Main power/Torque Speed Main power/Torque Speed Main power/Torque Speed Main power/Torque Tool changer (pick-up) Magazine pockets Additional tool magazine ZM 35 Chip-to-chip time Max. tool length Max. tool diameter with Max. magazine load Swivelling range +/- 115° C-axis...
Open the catalog to page 3
P in X-Y-Z axes according to VDI/DGQ 3441 (calculated at a constant ambient temperature of 20 °C +/-1 °C. Our products are subject to the German Export Law and require authorization since the attainable precision may be less than 6 qm] Chip slide Removable chip slide Chip conveyor Scraper belt or hinge conveyor ejection height ejection height chip cart External cooling lubricant supply With chip slide and cooling lubricant tank Base container capacity chip slide Base container capacity chip conveyor Internal cooling lubricant supply with paper band filter Capacity of base container Capacity of...
Open the catalog to page 4
