dynamic tornado twister

dynamic tornado twister

Product catalog summary
Conformity and Standards
The document outlines the conformity of the dynamic tornado twister with the EC Directive 2006/42/EC (Machinery Directive) and the harmonized standards DIN EN 13019: 2009-04 and EN 809: 2012-10.
Technology Overview
The dynamic tornado twister features two patented annual gap suction hoods, representing a new technology in marking removal. This innovation is set to revolutionize the market by effectively removing agglomerates and thick markings.
Specifications
  • Available Sizes: 650 mm and 1,000 mm
  • Working Width: Up to 250 mm (360 mm)
  • Nozzle Types: Flat jet or round jet nozzles
  • Max. Quantity: 20 flat jet nozzles (24 max) and 32 round jet nozzles (44 max)
  • Operating Pressure: Up to 3,000 bar / 43,511 psi
  • Rotation Speed of Spray Bar: Up to 3,000 rpm
  • Diameter of Suction Pipes: 2 x 250 mm
Features
  • Stepless height adjustment of the rotary drive
  • Joystick-controlled hydraulic arm
  • High flexibility through the combination of rotary and linear axes
  • Working range up to 4.5m / 180° horizontal
  • Video camera system on the suction hood with monitors installed in the vehicle cabin
  • LED lighting in front and behind the suction hood for adjustment and inspection of the cleaning result
Applications
The dynamic tornado twister is suitable for use on roads and racetracks.
See more

Catalog excerpts

dynamic tornado twister-1

dynamic tornado twister With its two different patented annual gap suction hoods, the dynamic tornado twister is the new patented technology in marking removal. This will revolutionise the marking removal market, to remove agglomerates and thick markings. Mit seinen zwei unterschiedlichen, patentierten Ringspaltabsaugungshauben ist der dynamic tornado twister die neue patentierte Technologie zur Entfernung von Markierungen. Dies wird den Markt der Markierungsentfernung revolutionieren, um Agglomerate und dicke Markierungen zu entfernen. -conformity in according the EC Directive 2006/42/EC (Machinery Directive) as well as the applied harmonized standards DIN EN 13019: 2009-04 and EN 809: 2012-10.

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.