UNIQ
4Pages

UNIQ® Mill Chuck With axial tool length adjustment Shank hollow shank taper A according to DIN 69893-1 l1 Dimensions in mm. Use: For clamping tools with smooth cylindrical shanks according to DIN 1835 form A, DIN 6535 form HA up to clamping diameter d1 = 12 mm as well as with recesses according to DIN 1835 form B, E and DIN 6535 form HB, HE directly and without reducing sleeve in the clamping diameter. The clamping diameter is designed for a shank tolerance of h6. Scope of delivery: With length adjustment screw, without coolant tube. Design: Highest tool life and production quality when using smooth cylindrical shanks according to DIN 1835 form A and DIN 6535 form HA. With a projection length of 2.5xD (max. 50 mm) radial run-out accuracy 3 µm. When using cylindrical shanks with an inclined clamping surface (form E and form HE), the accuracy may be impaired. Note: Chuck with axial tool length adjustment. Coolant supply via central through hole. Balancing quality: G 2.5 with 25,000 rpm in delive

UNIQ® Mill Chuck With axial tool length adjustment Shank BT according to ISO 7388-2 form JD/JF (JIS B 6339) *Hammer head design Dimensions in mm. Use: For clamping tools with smooth cylindrical shanks according to DIN 1835 form A, DIN 6535 form HA up to clamping diameter d1 = 12 mm as well as with recesses according to DIN 1835 form B, E and DIN 6535 form HB, HE directly and without reducing sleeve in the clamping diameter. The clamping diameter is designed for a shank tolerance of h6. Scope of delivery: With length adjustment screw, without coolant tube. Design: Highest tool life and...

UNIQ® DReaM Chuck, 4.5° With axial tool length adjustment, clamping initiation in the flange Shank: Hollow shank taper-A according to DIN 69893-1 l1 Dimensions in mm. Use: For clamping tools with smooth cylindrical shanks according to DIN 1835 form A, DIN 6535 form HA up to clamping diameter d1 = 12 mm as well as with recesses according to DIN 1835 form B, E and DIN 6535 form HB, HE directly and without reducing sleeve in the clamping diameter. The clamping diameter is designed for a shank tolerance of h6. Scope of delivery: With length adjustment screw, without coolant tube. Design:...

UNIQ® DReaM Chuck, 4.5° With axial tool length adjustment, clamping insertion in the collar Shank BT according to ISO 7388-2 form JD/JF (JIS B 6339) l1 Dimensions in mm. Use: For clamping tools with smooth cylindrical shanks according to DIN 1835 form A, DIN 6535 form HA up to clamping diameter d1 = 12 mm as well as with recesses according to DIN 1835 form B, E and DIN 6535 form HB, HE directly and without reducing sleeve in the clamping diameter. The clamping diameter is designed for a shank tolerance of h6. Scope of delivery: With length adjustment screw, without coolant tube. Design:...