*myaeroexpo

Model 8772

Product catalog summary

Overview:
The Model 8772 Axle Jack is a 15-ton capacity, two-stage hydraulic jack designed for jacking the main and/or nose landing gear of various aircraft. It features a two-stage cylinder assembly, hydraulic reservoir, and hand pump assembly, with a lifting handle for ease of handling. The jack is built to endure harsh conditions and rugged use, ensuring long-term service and product support.

Standard Features:

Hard chrome plated cylinder and plunger bores.
Corrosion-resistant plated extension screw and hand pump parts.
Manual hand pump.
Skydrol resistant safety yellow paint.
Factory proof load at 150% of rated capacity.
1-year standard warranty.
Fully enclosed shipping container.

Optional Features:

Customer specified paint color.
Repair kit.

Specifications:

Rated Capacity: 15 tons (13.6 metric tons).
Side Load: 15% of vertical load.
Low Height: 5.25 inches (133 mm).
Hydraulic Lift: 5 inches (127 mm).
Extension Screw: 2.25 inches (57 mm).
Total Extended Height: 12.5 inches (318 mm).
Oil Pressure at Rated Capacity: 4315 psig (303 kg/cm²).
Safety Pop-off Valve set at: 16.5 tons (15.0 metric tons).
Proof Load: 22.5 tons (20.4 metric tons).
Reservoir Capacity: 0.4 gallons (1.5 liters).
Hydraulic Fluid: MIL-PRF-5606 or equivalent.
Approximate Jack Net Weight: 40 lbs (18 kg).

Typical Aircraft Applications:

Nose Landing Gear: RJ
Main Landing Gear: RJ

Optional Equipment Codes:

SPC: Special Paint Color (yellow is standard).
8772PK: Repair Kit.

Shipping Data:

Dimensions: Length 26 inches (660 mm), Width 9 inches (229 mm), Height 18 inches (457 mm).
Weight: 60 lbs (27 kg).

Catalog excerpts

15 Ton Axle JackModel 87721 The Model 8772 Axle Jack is a 15 ton capacity, two stage hydraulic jack designed primarily for use in jacking main and/or nose landing gear of various aircraft. The jack consists of a two stage cylinder assembly, hydraulic reservoir and hand pump assembly. A lifting handle is also supplied for ease of handling. Model 8772 is built to withstand harsh environmental conditions, rugged use and to provide many years of continuous service. Our customers are guaranteed a quality product with each purchase and are assured of our continued product support whenever and wherever the need arises. • Hard chrome plated cylinder and plunger bores • Customer specified paint color • Extension screw and hand pump parts are plated • Repair kit to resist corrosion • Manual hand pump • Skydrol resistant paint (safety yellow) • Factory proof load @ 150% of rated capacity • 1 year standard warranty • Fully enclosed shipping container For more information contact: [email protected] 220 W. Los Angeles Avenue • Simi Valley, CA 93065 USA • Tel: 1-805-581-1200 • Fax: 1-805-584-1624 • www.malabar.com

Open the catalog to page 1

15 Ton Axle JackModel 87721 Reservoir Hydrau lie Cylinder Assy Hand Pump Handle Storage Positron Lifting Handle AirVent & Fill Port Hand Pump Assy Extended Height Hand Pump Handle For more information contact: [email protected] W. Los Angeles Avenue • Simi Valley, CA 93065 USA • Tel: 1-805-581-1200 • Fax: 1-805-584-1624 • www.malabar.com

Open the catalog to page 2

15 Ton Axle Jack Model 8772 Model 8772 Typical Aircraft Applications: Nose Landing Gear Main Landing Gear Optional Equipment Codes: (Specify with order) SPC: Special Paint Color (yellow is standard) 8772PK: Repair Kit Shipping Data: NOTE: Model 8772 jack is shipped in a fully enclosed shipping container. Length inches (mm) For more information contact: [email protected] 220 W. Los Angeles Avenue • Simi Valley, CA 93065 USA • Tel: 1-805-581-1200 • Fax: 1-805-584-1624 • www.malaba

Open the catalog to page 3

Model 8772

Model 8772

Catalog excerpts

All MALABAR INTERNATIONAL USA catalogs and technical brochures