*myaeroexpo

Model 652

Product catalog summary

Overview: The Model 652 Axle Jack is a hydraulic jack with a 20-ton capacity, designed for jacking the main and/or nose landing gear of various aircraft. It features a four-stage cylinder assembly, hydraulic reservoir, and a high/low pressure hand pump assembly. The jack is built for durability and long-term service in harsh conditions.

Standard Features:

Hard chrome plated cylinder and plunger bores for corrosion resistance.
Two manual hand pumps: one high pressure, low volume and one low pressure, high volume.
Skydrol resistant safety yellow paint.
Factory proof load tested at 150% of rated capacity.
One-year standard warranty and fully enclosed shipping container.

Optional Features:

Customer specified paint color.
Repair Kit available.

Specifications:

Rated Capacity: 20 tons (18.1 metric tons).
Side Load: 15% of vertical load.
Low Height: 5.5 inches (140 mm).
Hydraulic Lift: 11.38 inches (289 mm).
Extension Screw: 3.25 inches (83 mm).
Total Extended Height: 20.13 inches (511 mm).
Oil Pressure at Rated Capacity: 5660 psig (398 kg/sq cm).
Safety Pop-off Valve set at 22 tons (20.0 metric tons).
Proof Load: 30 tons (27.2 metric tons).
Reservoir Capacity: 0.9 gallons (3.4 liters).
Hydraulic Fluid: MIL-PRF-5606 or equivalent.
Approximate Jack Net Weight: 103 lbs (47 kg).

Typical Aircraft Applications: Suitable for nose and main landing gear of aircraft such as F14, F/A-18, and CH53.

Optional Equipment Codes:

SPC: Special Paint Color (yellow is standard).
652PK: Repair Kit.

Shipping Data: The jack is shipped in a fully enclosed container with dimensions: Length 26 inches (660 mm), Width 9 inches (229 mm), Height 18 inches (457 mm), and Weight 125 lbs (57 kg).

Catalog excerpts

20 Ton Axle Jack Model 6521 The Model 652 Axle Jack is a 20 ton capacity, four stage hydraulic jack designed primarily for use in jacking main and/or nose landing gear of various aircraft. The jack consists of a four stage cylinder assembly, hydraulic reservoir and a high/low pressure hand pump assembly. Lifting handles are also supplied for ease of handling. Model 652 is built to withstand harsh environmental conditions, rugged use and to provide many years of continuous service. Our customers are guaranteed a quality product with each purchase and are assured of our continued product support whenever and wherever the need arises. Standard Features: Optional Features: • Hard chrome plated cylinder and plunger bores • Customer specified paint color • Extension screw and hand pump parts are plated • Repair Kit to resist corrosion • Two manual hand pumps (one high pressure, low volume and one low pressure, high volume) • Hand pump handle can be used to pump both hand pumps simultaneously during low pressure operations • Skydrol resistant paint (safety yellow) • Factory proof load @ 150% of rated capacity • One year standard warranty • Fully enclosed shipping container For more information contact: [email protected] 220 W. Los Angeles Avenue • Simi Valley, CA 93065 USA • Tel: 1-805-581-1200 • Fax: 1-805-584-1624 • www.malabar.com

Open the catalog to page 1

20 Ton Axle Jack Model 652 For more information contact: [email protected] 220 W. Los Angeles Avenue • Simi Valley, CA 93065 USA • Tel: 1-805-581-1200 • Fax: 1-805-584-1624 • www.malaba

Open the catalog to page 2

Model 652 Typical Aircraft Applications: Nose Landing Gear Main Landing Gear F4, F14*, F/A-18, CH53 *Routine and dual flats Optional Equipment Codes: (Specify with order) SPC: Special Paint Color (yellow is standard) 652PK: Repair Kit Shipping Data: NOTE: Model 652 jack is shipped in a fully enclosed shipping container. Length inches (mm) For more information contact: [email protected] 220 W. Los Angeles Avenue • Simi Valley, CA 93065 USA • Tel: 1-805-581-1200 • Fax: 1-805-584-1624 • www.malaba

Open the catalog to page 3

Model 652

Model 652

Catalog excerpts

All MALABAR INTERNATIONAL USA catalogs and technical brochures