Model 165P10AR

Model 165P10AR

Model 165P10AR

Product catalog summary
Overview:
The Model 165P10AR Floating Auto-Retract Axle Jack is a 165-ton capacity hydraulic jack designed for jacking the main and/or nose landing gear of aircraft. It features a two-stage cylinder assembly mounted on a spherical bearing to reduce stress on the jack and aircraft components.

Standard Features:
  • Patented floating cylinder assembly to eliminate excessive side loads.
  • Double acting auto-retract cylinder with corrosion-resistant features.
  • Single valve control for easy operation and automatic retraction.
  • Control console for convenient operation.
  • Hydraulic fuse to prevent load lowering in case of hose failure.
  • Skydrol resistant paint and components.
  • Heavy-duty swivel casters and retractable front wheel for towing.
  • Air operated hydraulic pump and manual hand pumps.
  • Rain hat, oil filter cap, and chrome-plated components for durability.
  • Factory proof load tested with a 1-year warranty.

Optional Features:
  • Load gauge for load indication.
  • Ship adapter and storage box.
  • Lift ring kit for lifting the jack assembly.

Specifications:
  • Rated Capacity: 165 tons.
  • Low Height: 10.0 inches; with adapter: 11.25 inches.
  • Hydraulic Lift: 9.84 inches; Total Extended Height: 21.34 inches.
  • Base Width: 14.5 inches; Cylinder Diameter: 12.0 inches.
  • Oil Pressure at Rated Capacity: 7230 psig.
  • Proof Load: 225 tons.
  • Reservoir Capacity: 5.8 gallons.
  • Maximum Towing Speed: 5 mph.
  • Net Weight: 850 lbs.

Typical Aircraft Applications:
  • Main and Nose Landing Gear for A350, A380, B787, and others.
  • Optional adapter for specific aircraft models like A300, A310, B767, etc.

Optional Equipment Codes:
  • GA: Load Gauge
  • LK: Lift Ring Kit
  • SA886627: Ship Adapter

Jack Accessories:
  • Repair Kit
  • Tire Slave Kit
  • Axle Jack Transporter

Shipping Data:
  • Dimensions: 82 x 45 x 42 inches.
  • Weight: 1050 lbs.
See more

Catalog excerpts

Model 165P10AR-1

165 Ton Floating Auto-RetractTM Axle JackModel 165P10AR The Model 165P10AR Floating Auto-Retract Axle Jack is a 165 ton capacity, two stage hydraulic jack designed primarily for use in jacking the main and/or nose landing gear. The jack consists of a two stage cylinder assembly mounted on a spherical bearing (this bearing allows the jack ship adapter to follow the arc of the aircraft jack point, thus greatly reducing the stress on the jack’s cylinder assembly as well as the aircraft axle and strut), base assembly, frame/reservoir assembly, valve block assembly, hand pump assembly, air pump kit, lubricator kit, control console and rain hat. Model 165P10AR is built to withstand harsh environmental conditions, rugged use and to provide many years of continuous service. Our customers are guaranteed a quality product with each purchase and are assured of our continued product support whenever and wherever the need arises. Standard Features: • Patented floating cylinder assembly allows unit to track arc of landing gear jack point, eliminating excessive side loads on jack and landing gear thus providing safer operation and extending jack life • Double acting auto-retract cylinder assembly incorporates a fluid bath for sealing surfaces to minimize corrosion and extend seal life. It also includes Skydrol resistant seals and bronze upper bearings for longer service life • Auto-retract plungers remain fully retracted while jack is being towed or in storage to protect against corrosion, contaminants and accidental damage. • Single valve control for simple and easy aircraft raising, lowering and auto-retract. Jack retracts to full retracted position automatically which provides for easy removal from under aircraft jack point after each operation • Control console with all controls conveniently mounted for ease of operation. • Hydraulic fuse at the cylinder assembly prevents lowering of load in the event of a hose failure • Skydrol resistant paint (safety yellow) Standard Features (cont.) • 8 inch diameter heavy duty swivel casters and retractable front wheel with Skydrol resistant tread. The tow handle actuated front wheel provides improved ground clearance for towing • Air operated hydraulic pump and air line lubricator • Two manual hand pumps (one high pressure, low volume and one low pressure, high volume) • Rain hat (covers cylinder assembly) • Oil filter cap with filtered air vent and dipstick • Hard chrome plated cylinder and plunger bores • All unpainted parts are plated to resist corrosion • Factory proof load tested • 1 year standard warranty • Fully enclosed shipping container with skid Optional Features: • Load gauge for load indication (reads tons/psig) • Ship adapter (3/4” female spherical radius) and storage box • Lift ring kit (provides lift points to lift jack assembly) For more information contact: [email protected] 220 W. Los Angeles Avenue • Simi Valley, CA 93065 USA • Tel: 1-805-581-1200 • Fax: 1-805-584-1624 •

 Open the catalog to page 1
Model 165P10AR-2

165 Ton Floating Auto-RetractTM Axle JackModel 165P10AR Air Pump Lubricator 3/4 Spherical Radius Adapter and Storage Box (optional) Hydraulic Pump Lift Ring Kit (optional) Control Console Swivel Caster 1 1/4" Female -Sph erical Radius Wheel Retracts - operated by -raising or loweringTow Handle For more information contact: [email protected] 7/17 220 W. Los Angeles Avenue • Simi Valley, CA 93065 USA • Tel: 1-805-581-1200 • Fax: 1-805-584-1624 • www.malabar.com

 Open the catalog to page 2
Model 165P10AR-3

Model 165P10AR Typical Aircraft Applications: Main Landing Gear Nose Landing Gear Optional Equipment Codes: (Specify with order) GA: Load Gauge LK: Lift Ring Kit (provides lift points to lift jack assembly) SA886627: Ship Adapter P/N 886627 (3/4” female spherical radius) For more information contact: [email protected] 220 W. Los Angeles Avenue • Simi Valley, CA 93065 USA • Tel: 1-805-581-1200 • Fax: 1-805-584-1624 • www.mala

 Open the catalog to page 3
Model 165P10AR-4

165 Ton Floating Auto-RetractTM Axle JackModel 165P10AR Jack Accessories: (Order separately) 165P10ARPK: Repair Kit 871420: Tire Slave Kit (to operate air-operated hydraulic pump from aircraft tire) 886700: Model 8867 165 Ton Axle Jack Transporter (trailer for long-distance, high-speed towing) For more information contact: [email protected] 220 W. Los Angeles Avenue • Simi Valley, CA 93065 USA • Tel: 1-805-581-1200 • Fax: 1-805-584-1624 • www.malabar.com

 Open the catalog to page 4

All MALABAR INTERNATIONAL USA catalogs and technical brochures

  1. Model 95P10AR

    4  Pages

  2. Model 8714

    3  Pages

  3. Model 8920

    3  Pages

  4. Model 8966

    3  Pages

  5. Model 8857

    4  Pages

  6. Model 8942A

    3  Pages

  7. Model 8962

    3  Pages

  8. Model 718B

    5  Pages

  9. Model 8964

    3  Pages

  10. Model 7210B

    4  Pages

  11. Model 8704

    4  Pages

  12. Model 215B

    3  Pages

  13. Model 652

    3  Pages

  14. Model 8772

    3  Pages

  15. Model 642S

    3  Pages

  16. Model 648A

    3  Pages

  17. Model 8842

    4  Pages

  18. Model 215

    3  Pages

  19. Model 8970

    3  Pages

  20. Model 733A

    4  Pages

  21. Model 8294B

    2  Pages

  22. Model 8309

    2  Pages

  23. Model 8943-O2

    2  Pages

  24. Model 8943-N2

    2  Pages

  25. Model 8932-O2

    2  Pages

  26. Model 8932-N2

    2  Pages

  27. Model 8957-O2

    2  Pages

  28. MODEL 8957-N2

    2  Pages

  29. Model 175M

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.