Static Frequency Converter Three Phase Input System with Three Phase Output 10kVA - 300kVA Our Static Frequency Converters employ high frequency PWM technology (IGBT’s) to achieve a high quality output under all load conditions. The systems are designed with PFC (Power Factor Correction), thereby reducing input current and harmonic distortion. Our Static Frequency Converters are available in a wide power range and include an output isolation transformer as flexibility on the input as well as the output, and can be configured for a wide variety of voltages and frequencies. A comprehensive LCD display, control panel and data logger provide detailed and accurate status and control of the system. The ME3 S.F.C. provides flexibility, efficiency and compatibility in applications where high quality wave shape is a critical factor. Standard Features Optional Features • Adjustable Output Frequency • High IP Rating (Max IP54) • Battery Backup (UPS) • Adjustable Output Voltage • Sine Wave Output • Volt Free Contacts • Output Earth Leakage • Other Voltage / Frequencies Detection • Microprocessor control • Modular Design Improving Reliability and Serviceability • Remote Start / Stop • Emergency Power Off • Data Logger Stores up to 200 Alarms Magnus Power ME3 RANGE Output Active Power (kW) Apparent Output Power (kVa) 10.00 Input Number of phases Nominal Input Voltage VAC Voltage Tolerance Nominal Input Frequency Output Nominal Output Voltage Vac Voltage Adjustment Static Voltge Regulation Nominal Output Frequency Frequency Adjustment Output Frequency Stability Output Wave Shape SINE WAVE Load Power Factor * Other voltages

General Operating Temperature 0-40 °C Relative Humidity Protection Level RAL 7035 (other colours avaliable) Noise Level <55 - 70 dBA @ 1m (free filed conditions) System Enclosure dimensions 1000mm H x 650mm W x 480mm D (for systems 10kVA, 15kVA, 20kVA) 1100mm H x 550mm W x 750mm D (for systems up to 30kVA/30kW) 1440mmH x 725mm W x 800mm D (for systems from 40kVA – 100kVA) 1440mmH x 1440mm W x 800mm D (for 150kVA) 2000mm H x 1600mm W x 1000mm D (for systems from 180kVA – 300kVA) Standards Safety System Operation The Power Factor Corrected Rectifier converts the single or three phase mains supply...

Static Frequency Converter Digital display Indicating Lights Load on inverter Over temperature Overload Inver Rectifier fault Push buttons Meter scrolling Multi-function for LCD menu Inver Buzzer mute Mains failure Overload short circuit Inverter fault Over temperature Charger fault Under / over voltage Power supply fault Phase rotation incorrect IGBT saturation Display type Mains Voltage / Hz Inverter Voltage Load VA Load% Load Current Other information Time and date Enclosure temperature Setup information Remote monitoring / connections Volt Free Contacts Includes 1 volt free contact for status...

Magnus Power. Vision House, 41 Brunel Road. Churchfields Ind. Est. St. Leonards on Sea. East Susex. TN38 9RT Although the information and recommendations on this document are presented in good faith and believed to be correct, Magnus Power makes no representations or warranties as to the completeness or accuracy of the information. Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. In no event will Magnus Power be responsible for damages of any nature whatsoever resulting from the...