B400

B400

B400

Product catalog summary
Overview: The document provides technical specifications and features of the B400 series Uninterruptible Power Supplies (UPS) by Magnus Power. The B400 series is designed with On-line Double Conversion technology to ensure high efficiency and reliable power output.
Key Features:
  • On-line Double Conversion Topology: Provides complete isolation from input mains power.
  • Eco-Mode Function: Enhances efficiency with a full load efficiency of over 94%.
  • Wide Input Voltage Window: Handles voltage fluctuations without switching to batteries, extending battery life.
  • Intelligent Communication Slot: Supports SNMP, MODBUS, or Relay contact interface.
  • USB Connectivity: Includes intelligent monitoring and shutdown software.
  • Emergency Power Off (EPO) Connection: For safety and quick shutdown.
Technical Specifications:
  • Input: Voltage window of 110VAC-300VAC, THDi <5% at full load, and power factor of 0.99 at full load.
  • Output: Pure sine wave with nominal voltages ranging from 200VAC to 240VAC, voltage regulation of ±2%, and a transient recovery time of 100ms.
  • Battery: Backup time varies with models, with a powerful internal charger available.
  • Mechanical: Dimensions and weight vary by model, with operating temperature range from 0°C to 45°C and relative humidity up to 99% non-condensing.
  • Regulations: Complies with various IEC standards for safety and electromagnetic compatibility.
Models: The B400 series includes models B400-010-B, B400-010-C, B400-020-B, B400-020-C, B400-030-B, and B400-030-C, each with specific power ratings and features.
Additional Features: The UPS includes features like cold start, fan speed control, and frequency converter mode, with specific derating conditions for different output voltages and modes.
See more

Catalog excerpts

B400-1

Uninterruptable Power Supplies 1000VA - 3000VA On-line Double Conversion The B400 - a new range of compact and reliable UPS featuring On-line Double On-line Double Conversion technology. B400 Main Features On-Line Double Conversion Topology Eco-Mode Function Wide Input Voltage Window High Efficiency Selectable Output Voltage Frequency Converter Feature EPO Connection Intelligent Communication Slot IEC Plug Retention Clips Intelligent Shutdown and Monitoring Software USB Connectivity Battery Extension Modules The B400 was developed around the highest level of protection (On-Line Double Conversion) technology whilst maintaining high efficiency and increasing real power output. The output is VFI (Voltage and Frequency Independent) providing complete isolation from the input mains power. The range includes a static bypass line as standard providing zero transfer time between inverter and bypass. The wide input voltage window enables the B400 to handle brownouts, over-voltages and unsteady mains without switching to batteries thereby extending battery service life. A powerful internal charger is avaliable allowing backup times of up to 8 hours with a 6 hour recovery time. The B400 is genuinely "plug & play" and is delivered ready for immediate use, the product includes a free download of intelligent, user friendly monitoring and shut-down software with USB connection. It also features an intelligent slot for the option of SNMP, MODBUS or Relay contact interface. Further standard features are IEC output retaining clips and an Emergency Power Off connection. Magnus Power. Vision House, 41 Brunel Road. Churchfield Industrial Estate. St. Leonards on Sea East Sussex. TN38 9RT power being restored. Although the information and recommendations on this document are presented in good faith and believed to be correct, Magnus Power makes no representations or warranties as to the completeness or accuracy of the information. Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. in no event will Magnus Power be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information from this datasheet or the products to which the information refers. Magnus Power does not warrant the accuracy or timeliness of the materials on this datasheet and has no liability for any errors or omissions in the materials. Email: [email protected] www.magnuspower.co.uk

 Open the catalog to page 1
B400-2

B400 UPS Technical Specification Models INPUT Input Voltage Window <5% with full load Power Factor Input Frequency Range Intelligent Card Slot OUTPUT Power Power (kVA) max Power Factor Output Voltage Waveform Nominal voltage Pure Sine Wave 200VAC*/208VAC**/220VAC/230VAC/240VAC Voltage regulation Transient recovery Output Frequency Synchronization range Slew rate Battery mode External Battery Connector Transfer Time Normal mode to battery mode Inverter to bypass, ECO mode Full Load Efficiency ECO mode Overload Capability Crest Ratio BATTERY Rating/Type DC Voltage Back-up Time (full load) 12VDC/7Ah...

 Open the catalog to page 2

All MAGNUS POWER catalogs and technical brochures

  1. E2001.e

    2  Pages

  2. B8000

    4  Pages

  3. B9600

    6  Pages

  4. B500R

    3  Pages

  5. B200

    1  Page

  6. B9000

    6  Pages

  7. B500

    3  Pages

  8. B60

    1  Page

  9. ME3

    4  Pages

  10. LP3

    1  Page

  11. ME1

    4  Pages

  12. LP1

    1  Page

  13. LF3-400

    1  Page

  14. LF1-400

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.