GEKKO
2Pages

GEKKO PHASED-ARRAY FLAW DETECTOR PHASED-ARRAY FLAW DETECTOR FOR FIELD INSPECTIONS PAUT flaw detector Advanced features 64:64 parallel channels + 4 additional TOFD/ conventional UT channels International code compliance: ASME, AWS, API, ASTM, ISO-EN Real-time and Adaptive TFM Linear, Matrix and Dual Matrix arrays 3 axis management 3D imaging Cylindrical reconstruction Field ready All-level operators Step-by-step application Calibration wizards Analysis and reporting tools 10.4‘’ Resistive touch screen Dust & water resistant Hot swap battery Multi-group applications A WIDE RANGE OF APPLICATION Weld inspection . Pressure vessel inspection . Blistering characterization . Pipeline girth welds inspection Small diameter pipes . Corrosion mapping . Nozzle inspection . Composite inspection . Cladded weld inspection Weld inspection Rail inspection Aircraft wing inspection Corrosion mapping STATE-OF-THE ART PHASED-ARRAY TECHNOLOGY Real-time Total Focusing Method (TFM) TFM is a powerful technique that focuses at each point of a user-specified zone for accurate defect characterization and high-resolution imaging. The Adaptive Total Focusing Method allows to make images under a complex surface, using a phased-array probe and a flexible wedge and/or an immersion technique. Defect characterization High resolution imaging Adaptive Total Focusing

general L x W x H: 410mm x 284mm x 126mm Operating temperature range: from -10°C to 45°C Storage temperature range: -10 to 60°C with battery 3.5h batteries, hot swap 10.4‘’ high contrast resistive screen - resolution 1024x768 px Weight: 6kg (without battery) ; 0,480g /battery IP66 Shock resistance according to MIL-STD-810G Linear scanning (E-Scan), sectorial scanning (S-Scan) Up to 2,048 delay-laws | Up to 8 groups Multiple skewed sector scan for matrix and dual matrix array (DMA) CIVA fueled phased-array calculator Maximum number of active channels: 64 real-time TFM Max number of points...