NATO KIT AIR / HYDRAULIC

Product catalog summary

Introduction
This document outlines the specifications and usage instructions for the NATO Kit designed for pneumatic and hydraulic operations. It is intended for inflating nitrogen in damping elements and performing hydraulic refilling and purging of systems.

Specifications

Pneumatic System: Utilizes a traditional nitrogen bottle to supply gas. The pressure is adjusted according to the task, and operations are controlled via flexible hoses, connectors, and a three-way valve.
Hydraulic System: A hand pump delivers and pressurizes oil. The system is filled through hoses and connectors, with pressure monitored by a gauge. Excess oil is purged into a designated container.

Usage and Precautions

Pneumatic Action: Ensure all connections are secure before starting gas supply. Use appropriate gauges and control operations with the three-way valve. After completion, turn off the gas supply and purge the system before removing accessories.
Hydraulic Action: Verify oil quality in the pump matches the system. Install accessories at the pump's outflow. Choose gauges carefully, ensuring they can handle 1.5 times the maximum expected pressure. Fill the system at low pressure and be cautious of rapid pressure increases and unexpected movements. Close systems and purge before removing accessories.

Maintenance

Maintain cleanliness of tools and use appropriate tools for each task.
Ensure gauges match the required test pressures.
Refill the pump before subsequent use and store purged oil for treatment.
Conduct periodic tool inspections.

Catalog excerpts

DESTINATION: Ensemble NATO destiné à assurer un gonflage pneumatique à l’azote sur des éléments d’amortissement, et sous une pression mesurée et ajustée. Ensemble NATO destiné aussi à assurer un gavage hydraulique de circuits, à les monter sous pression si nécessaire, enfin à purger ces mêmes circuits. USAGE: Nato assembly is used to inflate with nitrogen all elements such as strut absober under an ajusted and measured pressure. Nato assembly is used to perform hydraulic refilling of systems, to pressurize them if necessary and to purge them. DESCRIPTION: EN PNEUMATIQUE La source gazeuse est une bouteille d’azote traditionnelle. Le gaz est détendu et amené à une pression en accord avec l’intervention en cours. Par le biais des flexibles de liaison et des raccords et au travers de la vanne trois voies, vous piloterez l’intervention. EN HYDRAULIQUE La pompe hydraulique débite l’huile et peut la comprimer. Par le biais des flexibles, des raccords de liaison, et au travers de la vanne trois voies, vous gavez le circuit hydraulique, avec la possibilité d’y générer une pression statique, contrôlée par le manomètre. L’excès est déchargé dans le vase adéquat par la purge. VALISE NATO AIR / HYDRAULIQUE NATO KIT AIR / HYDRAULIC LJP Industries 18, rue de la place - BP 39 77412 CLAYE - SOUILLY CEDEX Tel: 01.60.26.16.72 - Fax: 01.60.26.35.56 Contact: [email protected]

Open the catalog to page 1

DESCRIPTIONS: PNEUMATIC SYSTEM The gas supplied is from a traditional nitrogen bottle. Nitrogen pressure is reduced up to the working pressure in accordance with the action to perform. Through the flexible hoses and connectors as well with the 3 ways valve you monitor the action. HYDRAULIC SYSTEM The hand pump deliver oil at the pressure you need and can pressure it. Through the flexible hoses, the connectors and the 3 ways valve you fillthe hydraulic system with possibility to generate a static pressure monitor through gauge. The overfill is discharged in the bottle by purging. EMPLOI ET PRECAUTION...

Open the catalog to page 2

All LJP INDUSTRIES catalogs and technical brochures