CHARGE AND MEASURE NATO CASE

Product catalog summary

Overview: This document outlines the specifications and procedures for the NATO Nitrogen Charged and Measure Case, model LJNA 3191-V0, created on 21/02/2013.

Specifications:

Maximum pressure input: 6000 psi via a 10m flexible hose with anti-whip cable.
Automatic display activation upon pressure detection; deactivation when pressure is absent.
Pressure regulation: Low pressure up to 245 psi and high pressure up to 3000 psi, both with safety valves.
Dimensions: 630x500x500 mm; Weight: approximately 30 kg.

Charging and Inflation Mode:

Selection of charge/inflation circuit via a quarter-turn valve.
Low pressure regulation through a pressure reducer with a maximum of 245 psi.
High pressure regulation through a pressure reducer with a maximum of 3000 psi.

Pressure Control Mode:

Low pressure input via a 1.6m flexible hose with RBE08 connection.
High pressure input via a 5m flexible hose with RBE06 connection.
Filters are installed on all input and output connections.

Model Zones:

Blue zone: Low pressure from 0 to 245 psi.
Red zone: High pressure from 0 to 3000 psi.
Yellow zone: Battery management, charged at 220 VAC.

Contact Information: LJP Industries, 18 rue de la place, BP 39, 77412 CLAYE - SOUILLY CEDEX. Tel: 01.60.26.16.72, Fax: 01.60.26.35.56, Email: [email protected]

Catalog excerpts

- Zone bleue basse pression de 0 a 245 psi - Blue aera for low pressure from 0 to 245 psi - Zone rouge haute pression de 0 a 3000 psi - Red aera for high pressure from 0 to 3000 psi - Zone jaune = gestion de la batterie - en 220 VAC - Yellow aera for battery gestion - charge in 220 VAC Mode charge et gonflage AZOTE: Charged and inflation with nitrogen: -Entree de pression 6000 psi maxi par flexible 10m avec cable anti fouet. -Pressure in: 6000 psi maxi by flexible (L= 10000 mm )with anti-whip cable -Allumage des afficheurs des presence de pression. Extinction lors de l’absence de pression. -Automatic switching on display as pressure presence - and automatic switching of - as pressure absence -Choix du circuit de charge/gonflage par vanne 1/4 de tour. -Choice of the channel charged or inflation with the quarter turn valve -Regulation basse pression par detendeur maxi 245 psi (soupape). -Low pressure regulation by pressure-reducer maxi 245 psi ( safety valve ) -Regulation haute pression par detendeur maxi 3000 psi (soupape). -High pressure regulation by pressure - reducer maxi 3000 psi ( safety valve ) Mode contrdle de pression : Control high and low pressure -Entree basse pression par flexible 1,6m sur raccord RBE08. -low pressure input by flexible (L= 1600 mm) and RBE08 connection -Entree haute pression par flexible 5m sur raccord RBE06. -High pressure input by flexible ( L= 5000 mm ) and RBE06 connection -Allumage de l’afficheur utilise des presence de pression. -Display switch-on when pressure comes in -Filtre sur toute entree et sortie. -filter on all in and out connexion Dimensions hors tous 630x500x500. Dimensions in mm: 630x500x500 Poids: environ 30 KG. Weight: about 30 KG VALISE CHARGE ET MESURE NATO AZOTE NITROGEN CHARGED AND MEASURE NATO CASE LJP Industries 18, rue de la place - BP 39 77412 CLAYE - SOUILLY CEDEX Tel: 01.60.26.16.72 - Fax: 01.60.26.35.56 Contact: [email protected]

Open the catalog to page 1

All LJP INDUSTRIES catalogs and technical brochures