Technical Data MIZAR series MODEL Power - kVA Input Phases Voltage Frequency Output Wave-form Harmonic distortion Crest factor (non-linear load 75%) Voltage Frequency Overload Efficiency (AC-AC) Static switch mains-ups Batteries Type No. batteries Vdc voltage Restored energy time Stored energy time - min Protections Short-circuit EMI Suppression Signals LED Display Acoustic Computer interface Environmental Temperature Non-condensing humidity Noise (at 1 m) 1-Ph 220 / 230 / 240 V ± 20% (100 / 110 / 115 / 120 / 127 V on request) 50 / 60 Hz ± 5% SINE WAVE < 2% 2:1 220 / 230 / 240 V ± 1% (100 / 110 / 115 / 120 / 127 V on request) 50 / 60 Hz ± 0.2% 125% for 10 min, 150% for 1 min, 200% for 0.1 sec. > 92% Transfer time < 2 ms Sealed lead-acid (NiCd on request) 10 (12 V 7 Ah) 13 (12 V 7 Ah) 13 (12 V 12 Ah) 16 (12 V 12 Ah) 20 (12 V 12 Ah) 13 (12 V 18 Ah) 13 (12 V 27 Ah) 120 156 192 240 156 4 hours for 90% charge level 20 Overload, overtemperature, min/max battery voltage, min/max input voltage, min/max inverter voltage, synchronism With electronic protection EMI/RFI Filter Mains, Output, Battery, Overload, Fault Optional Battery mode, low battery, overload, overtemperature, fault RS232 - RS485 - SNMP - CAN (optional) 0°C ÷ 50°C 0% ÷ 95% < 60 dBA

Protection rating Dimensions W x D x H - mm Weight - kg UPS Classification according EN 62040-3 CE Marking Compliance with the standards Factory - Head Office S.P. km 5,3 C/da San Cusumano - 91100 Trapani - Italy Tel. +39 0923 562794 - Fax +39 0923 567880 Https://www.layer.it - E-mail: [email protected]