Model 6300 Automated Pitot Static Tester (RVSM)
1 / 2 PagesView full catalog
Model 6300 Automated Pitot Static Tester (RVSM)
Product catalog summary
Overview: The Model 6300 Automated Pitot Static Tester is designed for performing leak and accuracy checks on the Pitot Static systems of RVSM aircraft. It is particularly used for altimeters, airspeed indicators, and VSI's, ensuring compliance with RVSM requirements. The device features a remote unit with a keypad and a sunlight-readable display, and it can be made portable with an optional internal battery.
Specifications:
- Static Output: Measures in feet, meters, inHg, mbar, psi, mmHg, kpa with a pressure range of 1 to 32 inHg and an accuracy of 0.002 inHg.
- Altitude Function: Range from -2000 ft to 60,000 ft with varying accuracy depending on altitude.
- Climb Function: Range from 0 ft/min to 15,000 ft/min with 1% accuracy of the rate of climb.
- Pitot Output: Measures in knots, Mach, kmph, mph, EPR, inHg, mbar, psi, mmHg, kpa with a pressure range of 0 to 30 inHg and an accuracy of 0.003 inHg.
- Airspeed Function: Range from 0 to 690 knots with varying accuracy depending on speed.
- Mach Function: Range from 0.0 to 3.0 Mach with an accuracy of 0.001 above 0.2 Mach.
- EPR Function: Range from 0.9 to 30.0 with an accuracy of 0.002.
Features:
- Fully automated with high-precision control.
- Profiles feature with 15 profiles and 50 points each.
- Altitude offset correction and programmable limits.
- Protection against negative airspeed and self-test functionality.
- Manual vent valves for emergency venting and independent leak-checking capabilities.
- WiFi-enabled for remote control and equipped with a 5.8" sunlight-readable display.
- Optional internal battery for 8-hour operation and extended temperature range for cold climates.
Power and Interfaces:
- Power requirement: 90-260 VAC, 47-440 Hz, 100 W (200W with heaters).
- Interfaces include WiFi and RS232, with an optional encoder interface.
Dimensions and Environmental Specs:
- Main unit dimensions: 22” x 14” x 9” / 34 lbs; Remote unit: 6” x 6” x 1” / 1.8 lb.
- Operating temperature: 0°C to 50°C; optional range -40°C to 50°C.
- Storage temperature: -40°C to 75°C; Humidity: 5 to 100%.
Contact Information: Laversab, Sugar Land, TX, USA. Phone: (800) 285-7337, (281) 325-8300. Fax: (281) 325-8399. Website: www.laversab.com. Email: [email protected].
See more
Catalog excerpts
Model 6300 Automated Pitot Static Tester (RVSM) The Model 6300 is used to perform leak-checks and accuracy checks on the Pitot Static systems of RVSM aircraft. Accuracy checks are typically performed on altimeters, airspeed indicators and VSI's. The high accuracy of the Static output is fully compliant with RVSM requirements. The Model 6300 is equipped with a Remote unit which includes a keypad and a large sunlight-readable display. An internal battery (optional) makes the tester completely portable. The wide operating temperature (optional) makes it usable in any environment. The "Profiles"...
Open the catalog to page 2All LAVERSAB catalogs and technical brochures
62702 Pages
Model 66002 Pages
6300L2 Pages
MODEL 61502 Pages
6580 / 6580-HA2 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.