MODEL 6150

Product catalog summary

Overview: The Model 6150 Digital Air Data & Leak Tester is designed for direct connection to an aircraft's Pitot and Static systems. It simulates altitude, airspeed, and vertical speed indicator (VSI) while performing leak checks. The tester is equipped with high-accuracy digital transducers and built-in vacuum and pressure pumps, suitable for all aircraft types, including wide-body transport and cargo aircraft.

Specifications:

Static Port: Accuracy of 0.008 inHg, range from -2000 to 60,000 ft, resolution of 1 foot, and climb rate of 0 to 10,000 ft/min.
Pitot Port: Accuracy of 0.008 inHg, range from 0 to 500 knots, resolution of 0.1 knot.
Calibration Interval: Annually.
Power Requirement: 90-260 VAC, 47-440 Hz, 50VA.
Dimensions & Weight: 18” x 12” x 7”, 18 lbs.
Environmental Specs: Operating temperature 0°C to 50°C, storage temperature -40°C to 75°C, humidity 5 to 95% non-condensing.

Features:

Displays static output in feet, meters, inHg, or mbar and Pitot output in knots, kmph, inHg, or mbar.
Includes protection against over-range and negative airspeed, excessive leak rates, and pressure surges.
Precision metering valves for fine control of altitude, VSI, and airspeed.
Simultaneous leak checks on Pitot and Static systems with constant display of actual values and accumulated leaks for 1, 3, and 5-minute intervals.
Operates on aircraft power (110 VAC/400 Hz) with no warm-up time required.
No maintenance needed other than yearly calibration.

Additional Information: The unit is manufactured by Laversab, located in Houston, TX, USA. For more information, contact via phone at (800) 285-7337 or (281) 325-8300, fax at (281) 325-8399, or email at [email protected]. Visit their website at www.laversab.com.

Catalog excerpts

LEAK CHECK LEAK-TEST SHUTOFF VACUUM (ALTITUDE) Digital Air Data & Leak Tester

Open the catalog to page 1

Model 6150 Digital Air Data & Leak Tester The 6150 Tester connects directly to an aircraft’s Pitot and Static system. It allows the user to simulate altitude, airspeed and VSI and also to perform leak checks on both the Pitot and Static systems of an aircraft. The high accuracy of the digital transducers used in the tester makes it suitable for performing leak checks on any aircraft. The tester has built-in, high-capacity vacuum and pressure pumps that make it capable of handling leak-checks on any type of aircraft, including wide-body transport and cargo aircraft. Leak values are clearly displayed...

Open the catalog to page 2

MODEL 6150

MODEL 6150

Catalog excerpts

All LAVERSAB catalogs and technical brochures