OverviewThe Model 6300L Automated Pitot Static
Tester is designed for direct connection to an aircraft's Pitot and Static system. It allows for comprehensive testing of altimeters, climb indicators, airspeed/Mach indicators, air data computers, and auto-pilots from the cockpit using a lightweight Remote unit. The tester features built-in vacuum and pressure pumps, emergency manual bleed-down valves, and meets RVSM accuracy requirements with annual calibration.
Specifications- Static Output: Pressure range: 0.1 to 42 inHg, Altitude range: -4000 ft to 60,000 ft, Climb range: 0 ft/min to 25,000 ft/min.
- Pitot Output: Pressure range: 0.1 to 60 inHg, Airspeed range: 0 to 650 knots, Mach range: 0.0 to 3.0 Mach.
- Features: 'Jog' feature for easy adjustments, 'Profiles' feature for storing up to 20 standard set-point profiles.
- Pressure & Vacuum System: Includes diaphragm pumps, membrane dryer, and filter for clean air.
- Remote Unit: Displays all valid parameters on a single screen, operable from the cockpit.
- Manual Vent: Manual metering valves for venting in case of power loss.
- Power Requirement: 90-260 VAC, 47-440 Hz, 150 W.
- Interfaces: RS232, optional IEEE-488 & Encoder.
- Dimensions & Weights: Main unit: 22” x 14” x 9” / 40 lbs, Remote unit: 7” x 8” x 2” / 1 lb.
- Environmental Specs: Operating temp: 0°C to 50°C, Storage temp: -25°C to 75°C, Humidity: 5 to 100%.
Contact InformationLocated in Sugar Land, TX, USA. Phone: (800) 285-7337, (281) 325-8300. Fax: (281) 325-8399. Website: www.laversab.com. Email:
[email protected].