Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. Latitude Engineering
  3. AGL-N LASER ALTIMETER

AGL-N LASER ALTIMETER

AGL-N LASER ALTIMETER
1 / 1 PageView full catalog

AGL-N LASER ALTIMETER

Product catalog summary
Overview: The document describes a laser altimeter designed for autonomous takeoff and landing of small fixed and rotor-wing aircraft. It highlights the device's compact size, lightweight, and weatherproof features.
Specifications:
  • Laser: The altimeter has a useful range of 50 meters and a maximum output rate of 10 Hz. It is classified as a 1M Eyesafe laser.
  • Mechanical: The device weighs 2.5 oz (70 g) and measures 1.90 x 1.98 x 2.22 inches (4.82 x 5.03 x 5.64 cm). It is enclosed in aluminum and carbon fiber.
  • Electrical: It operates on a voltage range of 7-13.8 VDC and consumes less than 1 W of power.
  • Interface: The altimeter supports CAN and RS-232 interfaces and uses a DB-15 High Density connector.
Compatibility: The device is compatible with Piccolo Autopilot firmware version 2.0 or higher.
Regulatory Compliance: The product is subject to U.S. International Trade in Arms Regulation (ITAR) and the Commerce Control List, requiring licensing by the US Department of State PMDDTC and/or the US Department of Commerce. Re-export or transfer without prior authorization is prohibited.
Contact Information: Latitude Engineering, LLC, located at 744 South Euclid Avenue, Tucson, AZ 85719. Contact via phone at 520.792.2006 or email at [email protected].
See more

Catalog excerpts

AGL-N LASER ALTIMETER-1

FEATURE SET Ideal sensor for enabling autonomous takeoff and landing Smallest, lightest laser altimeter available 10 Hz laser, class 1M Eyesafe 50 meter useful range Designed for small fixed and rotor-wing aircraft Compatible with Piccolo Autopilot firmware 2.0 or higher SPECIFICATIONS LASER USEFUL RANGE 50 m LASER CLASS 1M Eyesafe ENCLOSURE Aluminum and Carbon Fiber INTERFACE INTERFACE CAN and RS-232 CONNECTOR DB-15 High Density TERMS & CONDITIONS Latitude's products and services fall under the U.S. International Trade in Arms Regulation (ITAR) and/or the Commerce Control List requiring licensing by US Department of State PMDDTC and/or US Department of Commerce. Items may not be re-exported or transferred without prior authorization. LATITUDE ENGINEERING, LLC 744 SOUTH EUCLID AVENUE TUCSON, AZ 85719 520.792.2006 [email protected]

 Open the catalog to page 1

All Latitude Engineering catalogs and technical brochures

  1. AGL-M LASER ALTIMETER
    AGL-M LASER ALTIMETER

    1  Page

  2. AGL LASER ALTIMETER
    AGL LASER ALTIMETER

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.