Aircraft Hangar Doors
11Pages

{{requestButtons}}

Catalog excerpts

Aircraft Hangar Doors - 1

HANGAR DOOR ELBATROFMOC DNA YSAE EROM ECNARTNE EHT EKAM Hangar door for huge industrial building

Open the catalog to page 1
Aircraft Hangar Doors - 2

Large Door System Large door requirement is crucial in shipyard and hangar areas. LID solves this problem with its vertical lifting fabric doors. The customized huge doors, produced according to all sizes, can consist of one piece or several pieces.

Open the catalog to page 2
Aircraft Hangar Doors - 3

Perfect Solutions for Entrances Resistant One of the biggest problems in some industrial areas is that the wind and rain caused by the environment disrupt the work inside. As LID, we are not stranger to these problems and we manufacture special doors that are resistant to these situations. Strong It is very strong and durable as the side guides and metal parts of the door are steel. The steel construction of the fabric section of the door is at least 600 mm thick. Each piece has been specially selected to make the door strong and the door is carefully assembled to provide this power. Safe...

Open the catalog to page 3
Aircraft Hangar Doors - 4

Simple The operation and using of the door are surprisingly simple. The door moves smoothly up and down along the side guides. When the door is to be opened, the bottom beam moves up, the fabric is folded and so the door is opened. Also, there is no rail under the door. Thus, your vehicles and equipment can be easily entered and exited. Economical LID manufacture all its products from quality parts. Our goal is to produce long-lasting doors and make our customers satisfied about entrances problem. Doors are manufactured with low maintenance so that a situation that will block your...

Open the catalog to page 4
Aircraft Hangar Doors - 5

Specification You can see all the details about our products on the following pages. Product features are described in detail, you can find all the technical properties related to the product. All information has been provided so that no questions will be raised in your mind. Dimension It is produced in one piece in maximum dimensions of 50 m x 50 m. It can be supplied in multiple pieces in desired sizes. No limit on size. Structure The metal parts of the door are made of steel. These parts are manufactured specially against all difficulty. Fabric Thickness of the fabric is 2 mm. It is...

Open the catalog to page 5
Aircraft Hangar Doors - 6

Motor Brands of the motors are Gamak and Volt. Specifications of the motor change according to dimensions of doors. Cable Two steel cables are used to operate the door. These two cables are connected to different motors and they work in the opposite direction to lift the door. Speed Standard: 20 cm/s Increase up to: 40 cm/s

Open the catalog to page 6
Aircraft Hangar Doors - 7

Wind Resistant The doors can withstand these wind pressures; While operating: 140 km/h When closed: 180 km/h. Fire Resistant Fabrics implied for the door are fire resistant. It is not easily flammable and also has the ability to extinguish itself when the fire is removed. Insulation A special seal is installed in the lower part of the beam to prevent air flow. This prevents hot or cold air exchange from under the door.

Open the catalog to page 7
Aircraft Hangar Doors - 8

Bottom Beam The bottom beam is made of steel construction. This beam distributes the entire load equally to the guides as the door opens. In addition, this structure increase wind resistance. Control Panel The control panel is of high quality and durability. It has the technology that can be used for many years. There are 2 direction buttons on the panel, 2 stop buttons and one of these stop buttons is the emergency button. Separate panel lock and key are available so that the panel can be used by the authorities. There are warning lights on the panel that indicate the status of the door.

Open the catalog to page 8
Aircraft Hangar Doors - 9

Operation There are 3 buttons on the control panel to control the door, these are the on-off and stop buttons. The door can be easily opened, closed and stopped using these functions. There are also audible and visual signals on the panel while the door is operated. Manual In order to manually control the door, it is necessary to use the hand crank located in the engine part. This method is used to close the door in emergency situations where the door is not working. If the door is too big, it is not possible to open the door with a crank. Safety CE Standard. Applicable Directives...

Open the catalog to page 9
Aircraft Hangar Doors - 10

Wind load resistance Safety lock Control panel Color So many color options. You can modified hangar doors with your choice. Mullion system Buzzer Warning light RAL 3020

Open the catalog to page 10
Aircraft Hangar Doors - 11

about us Established in 2010, LID is a supplier and installer firm of special doors and services for industrial. A more valuable, less invasive way where customers are learned rather than bought. We are exactly passionate it, and our mission is to help people earn and use the doors easily. We are excited to do works with our clients, we try our best to make perfect doors in their industry areas. Hangar Door Industrial Door Piknik Street, Bursa, Turkey Vertical Lifting PVC Fabric Door

Open the catalog to page 11