DESCRIPTION The model 1488.00 is a 30 t, multistage hydraulic tripod jack. LANGA Hydraulic Tripod Jacks are built with a modern design which combines high efficiency and cost-effective result in aircraft maintenance. Besides the basic configuration of each model, various optional are available to adapt the equipment to the customer’s requirements. The modular solution allows to use many common elements in our models, which reduces the maintenance cost and ensures the quick supply of spare parts and provide many years of continuous service. Every jack must prove its quality on the jack tester before the deliver to the customer. All models are lateral tested at 15% of the vertical load. PNEUMATIC PANEL ELECTRIC PANEL AIRBUS: A318-A321 ATR: 42/72 DE HAVILLAND: DASH7, DASH8-Q400 FOKKER: F50 IRKUT: MC21 LOCKHEED: C130 SUKHOI: SSJ100 NOTE: The manufacturer reserves the right to make amendments without prior notice at any time. Langa Industrial S.A.U. C/ Dehesa de Mari Martín, 31 28600 Navalcarnero – MADRID (SPAIN)

LANG A STANDARD FEATURES • Manual hand pump with high and low pressure operating modes. • Pneumatic driven hydraulic pump. • Hydraulic relief valve for overload protection in the event of internal fluid expansion due to temperature. • Low friction seals and secondary seal/wear ring for protection against contaminants. • HEAT TREATMENT: GAS NITROCARBURIZING WITH POST OXIDATION (superficial hardness and antioxidant steel properties) in cylinder bore and in hydraulic and mechanical extensions. • Manually operated safety nuts. • Control panel with manometer (dual scale: bar/t) and bubble level for...

NOTE: The manufacturer reserves the right to make amendments without prior notice at any time. ^ C/ Dehesa de Mari Martin, 31 28600 Navalcarnero - MADRID (SPAIN)

*Approximate dimensions NOTE: The manufacturer reserves the right to make amendments without prior notice at any time. ^ C/ Dehesa de Mari Martin, 31 28600 Navalcarnero - MADRID (SPAIN)