434-0000ALegacyFGNoseGear

Product catalog summary

Document Overview: This document is a technical drawing and parts list for the Legacy FG Nose Gear, produced by Lancair International, Inc. It includes detailed specifications, materials, and assembly instructions for the nose gear components.

Specifications:

All dimensions are in inches unless otherwise noted, following ASME Y14M - 1994 standards.
Tolerances are specified as: .XXX = .005, .XX = .01, .X = .025, Fractions = 1/32, Angles = 30'.

Parts List:

The document lists 36 items, including bolts, washers, nuts, tires, bearings, and other components necessary for the assembly of the nose gear.
Each part is identified by a part number, description, material, and vendor information where applicable.
Key components include the Left and Right Nose Wheels, Nose Gear Cylinder, Nose Fork, and various bolts and washers.

Procedures and Recommendations:

All sharp edges must be deburred and removed.
Initial release of the document was approved on 08/07/2006.

Proprietary Information:

The document contains proprietary and confidential information belonging to Lancair International, Inc. Reproduction without permission is prohibited.

Additional Notes:

The document includes a CAD file reference and is part of a larger set of engineering drawings for the Legacy Fixed Gear Nose Gear.

Catalog excerpts

PROPRIETARY AND CONFIDENTIAL: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF LANCAIR INTERNATIONAL, INC. REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF LANCAIR INTERNATIONAL, INC. IS PROHIBITED. INITIAL RELEASE. Left Nose Wheel, Legacy Right Nose Wheel, Legacy Lock Nut, 1/4", Hight Temp Tire, Nose Gear Race, Wheel Bearing Bearing, Nose Wheel Axel, Nose Gear Spacer, Axel, Nose Wheel Nose Fork, Legacy Fixed Gear Bushing, Axle, Nose Wheel Washer, Lite, Steel, 3!16 Nose Gear Cylinder, Mockup Plate, Nut Plate, Nose Fork Nut Plate, 5/16" Bolt, 5/16-24 x 1-17/32", 12 point Bolt, 5/16-24 x 1-13/32", 12 Point Solid Rivet B Pivot Bearing Block, Left Pivot Bearing Block, Right Plate, Mounting, Nose Gear Fairing Link, Nose Gear Nose Wheel Fairing (not shown) Nut, Nylock, Bushing, Nose Gear Plate, Keeper, Nose Gear Bolt, 5/16-24, 1-7/16" Washer, 5/16, Countersunk PER ASME Y14M - 1994. ALL DIMS IN INCHES UNLESS OTHERWISE NOTED. TOLERANCES .XXX .005 .XX .01 .X .025 FRACTIONS 1/32 ANGLES 30' SHEET SIZE FINISH: DEBURR & REMOVE SHARP EDGES FIRST USED ON: LEGACY FG PART NUMBER ORIG: ESCO AV. XXXXX A Legacy FG Nose Gear 3 CAD FILE: \\Lindbergh\DATA\Engr\Drawings\Legacy - Fixed Gear\Nose Gear\ 434-0000A Legacy FG Nose Gear

Open the catalog to page 1

434-0000ALegacyFGNoseGear

434-0000ALegacyFGNoseGear

Catalog excerpts

All Lancair International catalogs and technical brochures