1. Catalogs
  2. Lamar Technologies LLC
  3. Discharge capacity tester for all types of Nickel Cadmium, sealed or vented Lead Acid aircraft batteries

Discharge capacity tester for all types of Nickel Cadmium, sealed or vented Lead Acid aircraft batteries

Discharge capacity tester for all types of Nickel Cadmium, sealed or vented Lead Acid aircraft batteries

Product catalog summary
Product Overview
The BETA D-50™ is a discharge capacity tester designed for Nickel Cadmium and Lead Acid aircraft batteries, both sealed and vented. It supports any voltage or type of battery and offers a constant current discharge adjustable from 0.1 to 50 amperes. The device operates on either 115 or 230 VAC.
Key Features
  • Accept and Fail lights for simplified GO/NO-GO testing.
  • Selectable low voltage cutoff and audible alarm at the end of the test.
  • Meters and timer lock-in their reading for amp-hour capacity.
  • Selectable discharge time from 1 to 999 minutes with a digital elapsed time readout.
Operation
  • Model and P/N: BETA D-50.
  • Adjustable 0-50 amp discharge with an accuracy of ± 0.1 digit.
  • Weight: 30 lbs; Dimensions: 10¼”L x 14”H x 15”D.
  • #8 AWG DC battery cable with “Elcon” type connector.
  • NSN: 6130-01-462-6337; 6130-21-258-4430 (Canada).
  • AC input: 4A @ 115V, 2A @ 230V 50/60Hz.
Specifications
  • Low voltage cutoff selector.
  • Digital discharge timer, 1 to 999 minutes.
  • AC line selector on the rear for 115 or 230V.
  • Accept/Fail and On/Off lights.
  • Multi-turn discharge current selector.
  • AC switch, digital voltmeter, and ammeter.
Contact Information
Lamar Technologies LLC, 14900 40th Ave. NE, Marysville, WA 98223
Website: www.lamartech.com
Phone: 360-651-8869
Email: [email protected]
See more

Catalog excerpts

Discharge capacity tester for all types of Nickel Cadmium, sealed or vented Lead Acid aircraft batteries-1

BETA D-50 Discharge capacity tester for all types of Nickel Cadmium, sealed or vented Lead Acid aircraft batteries FEATURES TM Services any voltage or type of battery. Constant current discharge adjustable from 0.1 to 50 amperes. Selectable low voltage cutoff. Selectable discharge time from 1 to 999 minutes with digital elapsed time readout. Audible alarm at end of test. Meters & timer lock-in their reading for amp-hr capacity. Accept and Fail lights for simplified GO/NO-GO test. Operates on either 115 or 230 VAC. Adjustable 0-50 amp discharge, accuracy ± 0.1 digit. Set discharge current. At end of test, observe Accept/Fail light or check the battery’s amp-hr capacity on the locked-in digital meters. #8 AWG DC battery cable with “Elcon” type connector. AC input: 4A @ 115V, 2A@ 230V 50/60Hz. NSN: 6130-01-462-6337; 6130-21-258-4430 (Canada). CONTROLS Low voltage cutoff selector. Digital discharge timer, 1 to 999 minutes. Multi-turn discharge current selector. Digital voltmeter and ammeter. AC switch. Accept/Fail and On/Off lights. AC line selector - on rear, 115 or 230V. Shown with optional ALPHA C-25™ Lamar Technologies LLC 14900 40th Ave. NE Marysville, WA 98223 www.lamartech.com 360-651-8869 [email protected]

 Open the catalog to page 1

All Lamar Technologies LLC catalogs and technical brochures

  1. CA-1550 CML

    1  Page

  2. VR500-0101

    1  Page

  3. VR382

    1  Page

  4. VR300-28-40

    1  Page

  5. VR300-28-25

    1  Page

  6. VR286

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.