Ikulite PRESSURE SCANNER MODULE KPM-1-16 SERIES • High Accuracy Digital Compensation • No Heating or Cooling Needed • Wide Temperature Range -65°F to +255°F (-55°C to +125°C) • Mates with all KMPS Series Pressure Scanners • Silicon on Silicon Integrated Sensor VIS® • Patented Design The KPM-1-16 is a 16 position pressure scanner module. This module mates with any Kulite KMPS Series Pressure Scanner as well as being forward compatible with future pressure scanner chasis from Kulite. The temperature correction coefficients for the 16 on-board sensors are stored in internal memory. This allows for easy mating with any Kulite pressure scanner. Modules with different pressure ranges and modes (differential or absolute) can be attached to the same KMPS Series Pressure Scanner allowing for a multirange scanner. Modules can be individually replaced allowing for great flexibility during a test and easy replacement between tests. 1.5 Times Rated Pressure to 300 PSI (21 BAR) Maximum 2 Times Rated Pressure to 300 PSI (21 BAR) Maximum Fully Active Four Arm Wheatstone Bridge Dielectrically Isolated Silicon on Silicon 17 “O” Ring Face Seals (0.017” x 0.040”) Included 3 Flat Socket Head Screws (2-56 x 0.5”) Included Note: Custom pressure ranges, accuracies and mechanical configurations available. Dimensions are in inches. Dimensions in parenthesis are in millimeters. All dimensions nominal. (H) Continuous development and refinement of our products may result in specification changes without notice. Copyright © 2014 Kulite Semiconductor Products, Inc. All Rights Reserved. Kulite miniature pressure transducers are intended for use in test and research and development programs and are not necessarily designed to be used in production applications. For products designed to be used in production programs, please consult the factory. KULITE SEMICONDUCTOR PRODUCTS, INC. • One Willow Tree Road • Leonia, New Jersey 07605 • Tel: 201 461-0900 • Fax: 201 461-0990 • ht