1. Catalogs
  2. KULITE SEMICONDUCTOR PRODUCTS, INC.
  3. PRESSURE SCANNER KMPS-4-64-XX-Y SERIES

PRESSURE SCANNER KMPS-4-64-XX-Y SERIES

PRESSURE SCANNER KMPS-4-64-XX-Y SERIES

Product catalog summary
Specifications:
  • Pressure Ranges: 0.07 to 17 BAR, 250 PSI
  • Operational Modes: Gage or Absolute
  • Proof Pressure: 1.5 times rated pressure up to 300 PSI (21 BAR) maximum
  • Burst Pressure: 2 times rated pressure up to 300 PSI (21 BAR) maximum
  • Rated Electrical Excitation: 8 to 32 VDC
  • Maximum Current: 300 mA
  • Insulation Resistance: 100 Megohms @ 50 VDC
  • Output Impedance: < 100 Ohms
  • Full Scale Output (Analog): 0.5 to 4.5 V
  • Resolution: 16 Bit
  • Bandwidth (-3dB): DC to 1000 Hz
  • Total Error Band: ± 0.5% FSO (Typ.)
  • Interface: RS-485 or Ethernet
  • Resolution (Pressure): 24 Bits or 0.0015% F.S.
  • Total Error Band (Pressure): ± 0.2% Typ. (± 0.5% Max.)
  • Conversion Rate: 275 Samples/Sec/Channel
  • Operating Temperature Range: -65°F to 255°F (-55°C to 125°C)
  • Compensated Temperature Range: -65°F to 255°F (-55°C to 125°C)
  • Linear Vibration: 10g Peak, Sine 10 to 2000 Hz
  • Reference Pressure: 0-30 PSIA
  • Electrical Connection: 15 Pin Micro D-Sub
  • Weight: 0.55 lbs (250 Grams)
  • Sensing Principle: Fully Active Four Arm Wheatstone Bridge Dielectrically Isolated Silicon on Silicon
  • Pressure Port: .040 or .063 Bulged Tubulations (60° angle or straight)
Product Overview:

The KMPS-4-64 is a 64 position pressure scanner offering high accuracy digital and analog outputs. It supports up to four KPM-1-16 pressure modules, each with different pressure ranges and modes, allowing remote placement for easy installation. The RS-485 digital output enables multiple scanners to be read over a single data bus, while the Ethernet output allows integration into standard networks using TCP or UDP.

Features:
  • High Accuracy Digital Compensation
  • High Speed Digital Output (RS-485 or Ethernet)
  • Wide Temperature Range: -65°F to +255°F (-55°C to +125°C)
  • Trigger input for low latency acquisition
  • Vibration and moisture resistant for reliability
  • Silicon on Silicon Integrated Sensor VIS®
  • IEEE-1588 Timing
  • Remote Modules
  • Patented Design
Additional Information:

Custom pressure ranges, accuracies, and mechanical configurations are available. Continuous development may result in specification changes without notice. The product is intended for test and research and development programs, not necessarily for production applications.

See more

Catalog excerpts

PRESSURE SCANNER KMPS-4-64-XX-Y SERIES-1

@kulite' PRESSURE SCANNER KMPS-4-64-XX-Y SERIES Silicon on Silicon Integrated Sensor VIS® IEEE-1588 Timing Remote Modules Patented Design • High Accuracy Digital Compensation • High Speed Digital Output (RS-485 or Ethernet) • Wide Temperature Range -65°F to +255°F (-55°C to +125°C) The KMPS-4-64 is a 64 position pressure scanner with both high accuracy digital and analog outputs. The KMPS-4 electronics module can support up to four KPM-1-16 pressure modules each of which can be a different pressure range and mode. This allows the modules to be placed remotely from the electronics module for ease of installation in tight locations. The RS-485 digital output allows multiple scanners to be read over a single data bus. The Ethernet digital output allows integration into standard networks using TCP or UDP. The KMPS-4-64 has a trigger input for low latency triggered acquisition. Due to the wide temperature capability it does not require heating or cooling in wind tunnel, flight test and other harsh environments. The pressure transducers are vibration and moisture resistant leading to extreme reliability. For additional details see manual (KM 8000). Note: Custom pressure ranges, accuracies and mechanical configurations available. Dimensions are in inches. Dimensions in parenthesis are in millimeters. All dimensions nominal. (F) Continuous development and refinement of our products may result in specification changes without notice. Copyright © 2015 Kulite Semiconductor Products, Inc. All Rights Reserved. Kulite miniature pressure transducers are intended for use in test and research and development programs and are not necessarily designed to be used in production applications. For products designed to be used in production programs, please consult the factory. KULITE SEMICONDUCTOR PRODUCTS, INC. • One Willow Tree Road • Leonia, New Jersey 07605 • Tel: 201 461-0900 • Fax: 201 461-0990 • http://www.kulit

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.