pressure scanner KMPS-2-64-XX-Y SERIES • High Accuracy Digital Compensation • High Speed Digital Output (RS-485 or Ethernet) • No External Heating or Cooling Needed • Wide Temperature Range -650F to +2550F (-55°C to +1250C) The KMPS-2-64 is a 64 position pressure scanner with high accuracy digital output over either an RS-485 or Ethernet bus. There is an internal heater which keeps the internal temperature above freezing to avoid internal icing. An optional motor allows for digital control over the purge mechanism. The KMPS also features auto-zero capabilities. The KMPS-2-64 is ideally suited for the flight test market. The Ethernet version features IEEE-1588 timing for precise correlation between multiple devices on the network. The pressure sensors are vibration and moisture resistant leading to extreme reliability. Modules with 16 sensors each are individually replaceable by the user. This allows for different pressure ranges and modes (differential and absolute) in the same scanner. For additional details see manual (KM 8001). Auto Zero Integral Purge IEEE-1588 Timing Silicon on Silicon Integrated Sensor VIS® Patented Design Pressure Ranges Operational Modes Proof Pressure Burst Pressure Rated Electrical Excitation Maximum Current Insulation Resistance Resolution (Pressure) Total Error Band (Pressure) Conversion Rate Operating Temperature Range Compensated Temperature Range Linear Vibration Reference Pressure Electrical Connection Sensing Principle Pressure Port 1.5 Times Rated Pressure to 300 PSI (21 Bar) Maximum 2 Times Rated Pressure to 300 PSI (21 Bar) Maximum 19 Pin Circular Bayonette Connector (IPT07Y14-19PF2) Fully Active Four Arm Wheatstone Bridge Dielectrically Isolated Silicon on Silicon Pneumatic Quick Disconnect (73-Z0C-FB-040) Note: Custom pressure ranges, accuracies and mechanical configurations available. Dimensions are in inches. Dimensions in parenthesis are in millimeters. All dimensions nominal. (M) Continuous development and refinement of our products may result in specification changes without notice. Copyright © 2014 Kulite Semiconductor Products, Inc. All Rights Reserved. Kulite miniature pressure transducers are intended for use in test and research and development programs and are not necessarily designed to be used in production applications. For products designed to be used in production programs, please consult the factory. kulite semiconductor products, Inc. • One WIIIow Tree Road • Leonla, New Jersey 07605 • Tel: 201 461-0900 • Fax: 201 461-0990 • http://www.kullte.com