1. Catalogs
  2. KULITE SEMICONDUCTOR PRODUCTS, INC.
  3. MINIATURE RUGGEDIZED PRESSURE TRANSDUCER XTL-190 (M) SERIES

MINIATURE RUGGEDIZED PRESSURE TRANSDUCER XTL-190 (M) SERIES

MINIATURE RUGGEDIZED PRESSURE TRANSDUCER XTL-190 (M) SERIES

Product catalog summary
Overview: The XTL-190 (M) Series is a miniature ruggedized pressure transducer designed for easy installation and high performance. It features patented leadless technology (VIS®) and a high natural frequency, making it suitable for various media compatible with 15-5 SS or SiO2.
Specifications:
  • Pressure Range: 0.7 to 140 BAR (10 to 2000 PSI)
  • Operational Modes: Absolute, Gage, Differential, Sealed Gage
  • Over Pressure: 2 times rated pressure, max 3000 PSI (210 BAR)
  • Burst Pressure: 3 times rated pressure, max 5000 PSI (350 BAR)
  • Electrical Excitation: Rated at 10 VDC/AC, max 12 VDC/AC
  • Input/Output Impedance: 1000 Ohms
  • Full Scale Output: 100 mV (Nominal)
  • Operating Temperature Range: -65°F to +350°F (-55°C to +175°C)
  • Compensated Temperature Range: +80°F to +180°F (+25°C to +80°C)
  • Weight: 4 grams excluding cable
Performance:
  • Natural Frequency: Ranges from 175 KHz to 1400 KHz depending on configuration
  • Acceleration Sensitivity: Varies with configuration, as low as 2.0x10-5 % FS/g
  • Thermal Zero/Sensitivity Shift: ± 1% FS/100°F
Environmental and Physical Characteristics:
  • Insulation Resistance: 100 Megohm Min. @ 50 VDC
  • Steady Acceleration: 10,000g max
  • Linear Vibration: 10-2,000 Hz Sine, 100g max
  • Mounting Torque: 15 Inch-Pounds (Max.)
Installation and Connection:
  • 4 Conductor 26 AWG Shielded Cable, 36" Long
  • Optional connector version available
Additional Information: Custom pressure ranges, accuracies, and mechanical configurations are available upon request. The transducer is primarily intended for test and R&D programs, not production applications. For production use, consult the factory. Kulite recommends using the KSC Series signal conditioners to enhance measurement capabilities.
See more

Catalog excerpts

MINIATURE RUGGEDIZED PRESSURE TRANSDUCER XTL-190 (M) SERIES-1

MINIATURE RUGGEDIZED PRESSURE TRANSDUCER XTL-190 (M) SERIES • Easy Installation • Patented Leadless Technology VIS® • High Natural Frequency The ruggedness of this sensor has not compromised its performance. It was designed for ease of installation and will operate properly in any medium compatible with 15-5 SS or SiO2. Its Patented Leadless construction makes it possible for the sensing unit to be installed in such a way that will not compromise its high natural frequency. Kulite recommends the KSC Series of signal conditioners to maximize the measurement capability of the XTL-190 transducer. Note: Custom pressure ranges, accuracies and mechanical configurations available. Dimensions are in inches. Dimensions in parenthesis are in millimeters. All dimensions nominal. (O) Continuous development and refinement of our products may result in specification changes without notice. Copyright © 2014 Kulite Semiconductor Products, Inc. All Rights Reserved. Kulite miniature pressure transducers are intended for use in test and research and development programs and are not necessarily designed to be used in production applications. For products designed to be used in production programs, please consult the factory. KULITE SEMICONDUCTOR PRODUCTS, INC. • One Willow Tree Road • Leonia, New Jersey 07605 • Tel: 201 461-0900 • Fax: 201 461-0990 • http://www.kulit

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.