KMPS-3-64-XX-Y SERIES PRESSURE SCANNER

Product catalog summary

Overview: The KMPS-3-64-XX-Y series is a high-accuracy pressure scanner developed by Kulite Semiconductor Products, Inc. It features digital compensation and high-speed digital output via RS-485 or Ethernet. The device is designed for both flight and ground testing environments, offering a wide temperature range and water-resistant casing.

Specifications:

Pressure Ranges: 0.07 to 17 BAR (1 to 250 PSI)
Operational Modes: Gage or Absolute
Proof Pressure: 1.5 times rated pressure up to 300 PSI (21 Bar) maximum
Burst Pressure: 2 times rated pressure up to 300 PSI (21 Bar) maximum
Rated Electrical Excitation: 20 to 32 VDC
Maximum Current: 300 mA + 2A for heater
Resolution: 24 bits or 0.0015% F.S.
Total Error Band: ±0.2% typical (±0.5% max.)
Conversion Rate: 275 samples/sec/channel
Operating Temperature Range: -65°F to 255°F (-55°C to 125°C)
Weight: 4 lbs. (1.8 kg)

Features:

High accuracy digital output with RS-485 or Ethernet interface
Internal heater to prevent icing
Auto-zero capabilities
Water-resistant design suitable for outdoor testing
IEEE-1588 timing for precise synchronization
Vibration and moisture-resistant sensors
Modular design with replaceable sensor modules

Applications: The KMPS-3-64 is ideal for use in flight and ground test markets, providing reliable performance in harsh environments. It supports both differential and absolute pressure modes, making it versatile for various testing scenarios.

Additional Information: Custom pressure ranges, accuracies, and mechanical configurations are available upon request. The product is intended for test and research applications, not necessarily for production use.

Catalog excerpts

KMPS-3-64-XX-Y SERIES PRESSURE SCANNER-1

Water Resistant Design Auto Zero Integral Purge IEEE-1588 Timing No External Heating or Cooling Needed Patented Design The KMPS-3-64 is a 64 position pressure scanner with high accuracy digital output over either an RS-485 or Ethernet bus. There is an internal heater which keeps the internal temperature above freezing to avoid internal icing. An optional motor allows for digital control over the purge mechanism. The KMPS also features auto-zero capabilities. The KMPS-3-64 has a water resistant case ideal for outdoor testing. The KMPS-3-64 is ideally suited for the flight and ground test market. The Ethernet version features IEEE-1588 timing for precise correlation between multiple devices on the network. The pressure sensors are vibration and moisture resistant leading to extreme reliability. Modules with 16 sensors each are individually replaceable by the user. This allows for different pressure ranges and modes (differential and absolute) in the same scanner. For more information see the KMPS-3 manual (KM 8001). MOTOR PURGE 1.5 Times Rated Pressure to 300 PSI (21 Bar) Maximum 2 Times Rated Pressure to 300 PSI (21 Bar) Maximum 22 Pin Circular Threaded Connector (D38999/23YC35CN) Fully Active Four Arm Wheatstone Bridge Dielectrically Isolated Silicon on Silicon Pneumatic Quick Disconnect (73-Z0C-FB-040) Note: Custom pressure ranges, accuracies and mechanical configurations available. Dimensions are in inches. Dimensions in parenthesis are in millimeters. All dimensions nominal. (E) Continuous development and refinement of our products may result in specification changes without notice. Copyright © 2014 Kulite Semiconductor Products, Inc. All Rights Reserved. Kulite miniature pressure transducers are intended for use in test and research and development programs and are not necessarily designed to be used in production applications. For products designed to be used in production programs, please consult the factory. KULITE SEMICONDUCTOR PRODUCTS, INC. • One Willow Tree Road • Leonia, New Jersey 07605 • Tel: 201 461-0900 • Fax: 201 461-0990 • http://www.kulit

Open the catalog to page 1

KMPS-3-64-XX-Y SERIES PRESSURE SCANNER

KMPS-3-64-XX-Y SERIES PRESSURE SCANNER

Catalog excerpts

All KULITE SEMICONDUCTOR PRODUCTS, INC. catalogs and technical brochures