APT-51HL-1000 / APTE-51HL-1000 Differential
2Pages

Developed For Use With High Line Pressure Compared To Low Differential Pressure Ideal For Measuring Pressure Drop Across Filters To Monitor Filter Clogging High Natural Frequencies Unprecedented Stability And Reliability To High Temperatures (Ruggedized Internal Construction) Leakproof, All Welded Construction (No Leak After Exposure To 2000°F 1093°C) Utmost In Safety (Secondary Containment Of Pressure Media) Fully Qualified (Passed Extensive Environmental Tests, RTCA/DO-160F) FAA Manufacturer's Maintenance Facility PRESSURE INLET ORIFICE .040 DIA. (1.1) DIFFERENTIAL OUTPUT (DO NOT GROUND) + OUTPUT OR - OUTPUT SPECIFICATIONS Excitation UNAMPLIFIED APT-SERIES 10VDC Regulated AMPLIFIED APTE SERIES 28VDC ± 4V 5VDC Diff. or Single Ended Case Length May Vary With Range, Measuring Mode, Pressure Port and Connector 10 Times Scale Range, 2000 PSI (Max.) 2 Times Rated Pressure Range, 1000 PSID (Max.) 5 Times Rated Pressure Range, 1000 PSID (Max.) ± 2% FSO From 32°F (0°C) to 185°F (85°C), Increasing to ± 3% FSO at -65°F (-55°C) and +250°F (120°C), The APT Maintains ± 3% FSO to 300°F (150°C) Main Port: JP-4 and JP-5 Grade Aviation Turbine Fuel Per MIL-T-5624, Hydraulic Fluid Per MIL-H-5606, MIL-H-83282, Engine and Transmission Lubrication Oil Per MIL-L-7808 and MIL-L-23699 and Aviation Gasoline Per MIL-G-5572 All Grades Reference Port: Clean Dry Gas Operational After Being Subjected to “G” Levels of 12 “G”s Per MIL-STD-810C, Method 513.2 Procedure 1 RTCA/DO-160F, Sec 8, Cat R, D & D1 Random Vibration Curves RTCA/DO-160F, Sec 7, Cat B, 20g, 11 msec sawtooth shock APTE SERIES: Meets RTCA DO-160 Sections 18, 19 and 21 All Cat. A, Section 20 Cat. U. (With Shielded Cable) APTE SERIES: Unit Satisfies Power Input and Voltage Spike Conducted DO-160 Sections 16 and 17. Power Input Test 16 Voltage Spike Conducted Test 17 Note: Custom pressure ranges, accuracies and mechanical configurations available. Dimensions are in inches. Dimensions in parenthesis are in millimeters. All dimensions nominal. (B) Continuous development and refinement of our products may result in specification changes without notice. Copyright © 2014 Kulite Semiconductor Products, Inc. All Rights Reserved. KULITE SEMICONDUCTOR PRODUCTS, INC. • One Willow Tree Road • Leonia, New Jersey 07605 • Tel: 201 461-0900 • Fax: 201 461-0990 • http://www.kulite.

TYPICAL ERROR BAND PERCENT - FULL SCALE PERCENT - FULL SCALE FIG I: TYPICAL ERROR BAND - UNAMPLIFIED UNIT FIG II: TYPICAL ERROR BAND - AMPLIFIED UNIT NOTE: OTHER TEMPERATURE RANGES AND TIGHTER SPECIFICATIONS ARE AVAILABLE. 3 WIRE 0.5 - 5V OUTPUT REGULATOR +INPUT RED (PIN A) –INPUT BLACK (PIN B) OUTPUT GREEN (PIN C) AMPLIFIER AMPLIFIER –OUTPUT WHITE (PIN D) DIFFERENTIAL OUTPUT - DO NOT GROUND + OUTPUT OR – OUTPUT Note: Custom pressure ranges, accuracies and mechanical configurations available. Dimensions are in inches. Dimensions in parenthesis are in millimeters. All dimensions nominal. (B)...