Knurr Technical Furniture | Knurr Dacobas® Control Room Solution Ergonomic, modular, future-proof

Knürr Dacobas® Knürr Dacobas® Applications Capabilities Knürr Dacobas® Control Consoles Strong points Control Desks Side Panels Corners 19” Pedestal 19” Frame Cabling system Functional Rails Perforated Rear Panel Knürr Dacobas® Consoles Circular Console Operator Console Height-Adjustable Control Console Knürr Dacobas®-Consoles Applications and Capabilities Our ergonomically refined control consoles are used the world over and perform with excellent results in traffic control and airport operations and control centres. The demanding 24-hour operation in such environments is, of course, every bit...

Knürr Dacobas® Control and measurement consoles in the process industry are closely linked to the production process, and are therefore often exposed to quite severe conditions. Ergonomics are once again the center of focus in this area, but different technologies are utilized in each production process, and these require a high standard of flexibility with technical integration. This is where Knürr Dacobas® can fully implement the strengths that it has continually further developed over several decades.

Knürr Dacobas® Knürr Dacobas® Control Consoles A special product area of the Knürr Dacobas® range is dedicated to the technical features of control consoles. This standard range allows most requirements to be covered, especially for RfPs – cost-effective, efficient and with short delivery times. Technical pedestals, lowered monitors, 19” integration, cabling systems, console superstructures and flat screen holders generate an all-inclusive range that covers practically every requirement. Customer specific requests in excess of our standard product range can be fulfilled by modifiyng standard...

Knürr Dacobas® Knürr Dacobas® Control Consoles Strong points 1 Ergonomics Full front cover provides modesty screen for the leg area.The ergonomic leg space enables free movement of the chair in the linkup area. Spacious desk depth of 1000 mm for setting up 550 mm (21”) monitors. Cable routing For cabling and installation of equipment, front and rear covers completely removed. Simple and dust protected cable entry from above in the cable duct. Brush strip across the entire desk width. Additional work and storage surfaces are created with desktop superstructures. A simple plug/screw connection...

Knürr Dacobas® Knürr Dacobas® Control Desk Level working surface, one-piece front and rear covers - Working level with full-cover worktop - Control desk frame with integrated front and rear panel mounting - Technical pedestal accessible from front and rear, clear depth - 350 mm - Cable routing possible from above in the cable duct across the entire desk width - Dust protection in the cable routing area with brush strip - The technical pedestal is open on the side with link-up for horizontal cabling - Full front and rear cover can be removed from the technical pedestal - Technical bottom cover...

Knürr Dacobas® Knürr Dacobas® Control Desk Lowered monitor surface, one-piece front and rear covers - Working level with worktop and lowered monitor level - Control desk frame with integrated front and rear panel mounting - Lowered monitor level with cable entry for mouse and keyboard - Cable routing possible from above in the cable duct across the entire desk width - Dust protection in the cable routing area with brush strip - Technical pedestal accessible from front and rear, clear depth -350 mm - The technical pedestal is open on the side with link-up for horizontal cabling - Full front and...

Knürr Dacobas® Knürr Dacobas® Control Desk Level working surface, several-piece front and rear covers Material / Finish - Worktop: three layer particle board, FP/Y E1 version, fire protection class B2 - Worktop coating: high pressure plastic laminate - Desk frame: sheet steel, zinc passivated - Front and rear covers: three layer particle board, FP/Y E1 version, directly coated, fire protection class B2 - Technical bottom cover, powder-coated texture - Working level with full-cover worktop - Control desk frame with integrated front and rear panel mounting - Technical pedestal accessible from front...

Knürr Dacobas® Knürr Dacobas® Control Desk Lowered monitor surface, several-piece front and rear covers Material / Finish - Worktop: three layer particle board, FP/Y E1 version, fire protection class B2 - Worktop coating: high pressure plastic laminate - Desk frame: sheet steel, zinc passivated - Monitor trough, sheet steel, powdercoated texture - Front and rear covers: three layer particle board, FP/Y E1 version, directly coated, fire protection class B2 - Technical bottom cover, powder-coated texture - Working level with worktop and lowered monitor level - Control desk frame with integrated...

Knürr Dacobas® Knürr Dacobas® Control Desk End Side Panel - Side panel for closing off control console desks, straight and lowered. Material / Finish - Desk leg, extruded aluminium, powder-coated texture - Side panel, three layer particle board, FP/Y E1 version, directly coated, fire protection class B2 - Retaining plate, sheet steel, powder-coated texture KON20025 Colour - Desk leg and retaining plate: RAL 5008 grey blue - Side panel: RAL 7035 light-grey Supply schedule 2 Desk legs with cover components 1 Side panel 1 Side panel retaining plate How supplied Pre-assembled Knürr Dacobas® Control...

Knurr Dacobas® Control Consoles Control console corner KON20068 90° Trapezoid wall corner - Level corner panel - Corner frame with integrated front and rear panel mounting - Technical pedestal accessible from front and rear, clear depth -350 mm - Extensive cable routing possible from above in - Dust protection in the cable routing area with brush strip - The pedestal is open on the side with link-up - Full front and rear cover can be removed from - Bottom cover with cable entry, - Technical bottom cover prepared for 19" frame mounting - Prepared for socket strip - 750 N (static surface load)...