RCA1510 SERIES

Product catalog summary

Product Overview:
The RCA1510 Series Digital Heading Indicator by Kelly Manufacturing Company is a modern, FAA-certified replacement for mechanical directional gyros. It integrates an internal magnetometer and GPS receiver to provide stable and accurate heading readings without the need for mechanical gyroscopes, eliminating issues like drifting.

Specifications:

Operating Voltage: 9 to 32VDC
Running Current: 0.20 AMPs max (14VDC), 0.15 AMPs max (28VDC)
Circuit Breaker Size: 1 AMP
Accuracy: 2 degrees
Operating Temperature Range: -30º to +55º C
Mating Connector: MS3116E8-4S or equivalent
Weight: 8 oz. max
FAA Specification Conformance: TSO-C6e, TSO-C113a, DO-160G & DO-178B Level C

Features:

Self-contained unit with no external connections needed other than power and GPS antenna
Multi-Volt operation suitable for both 14V and 28V systems
Adjustable brightness on a highly visible screen
Traditional rotating dial display with digital numeric headings
Quick-Set Heading Bug feature for easy adjustments
Vibration resistant and lightweight design
Black anodized bezel

Installation and Design:
The RCA1510 fits a standard 3-inch panel cut-out and is designed to operate without GPS input if the signal is lost. It features a dual processor for enhanced performance and is all-digital with no moving parts, ensuring durability and reliability.

Warranty:
The product comes with a 2-year warranty.

Contact Information:
For more information, contact Kelly Manufacturing Company at (316) 265-6868 or email [email protected]. Visit their website at www.kellymfg.com.

Catalog excerpts

DIGITAL HEADING INDICATOR ••TOTALLY SELF-CONTAINED ••QUICK-SET HEADING BUG ••INTERNAL MAGNETOMETER AND GPS ••SHARP DIMMABLE DISPLAY ••DUAL PROCESSOR PERFORMANCE ••MULTI-VOLT OPERATION (9 TO 32 VOLTS) ••FITS STANDARD PANEL CUTOUT ••VIBRATION RESISTANT ••ALL DIGITAL - NO MOVING PARTS ••BLACK ANODIZED BEZEL ••LIGHTWEIGHT 8oz. Max ••FAA CERTIFIED 2 YEAR WARRANTY! KELLY MANUFACTURING COMPANY KELLY MANUFACTURING COMPANY 555 SOUTH TOPEKA WICHITA, KS 67202 U.S.A.

Open the catalog to page 1

GROUND 9-32 VDC SPARE SPARE PANEL CUTOUT REAR MOUNTING • All dimensions in inches. • Mounting Hardware 6-32 screw - 0.5” plus panel thickness • Mating Connector Figure 1, General Dimensions of the RCA1510-3 KELLY MANUFACTURING COMPANY KELLY MANUFACTURING COMPANY 555 SOUTH TOPEKA WICHITA, KS 67202 U.S.A. For more information: Phone: (316) 265-6868 Email: info@kellym

Open the catalog to page 2

RCA1510 SERIES

RCA1510 SERIES

Catalog excerpts

All KMC catalogs and technical brochures