8763B
5Pages

IEPE Triaxial Accelerometer Miniature Ceramic Shear 50 ... 2 000 g The Type 8763B… triaxial accelerometer measures vibration in three orthogonal axes. This 0.43 in [10.9 mm] cube accelerometer has ±50, 100, 250, 500, 1 000 and 2 000 g measuring ranges with low mass. • Miniature, low mass cube • 3 x 5-40 threaded holes for mounting ease • M4.5 and ¼–28, 4 pin connector options • Hermetic, titanium construction • Low base strain sensitivity • Voltage output (IEPE) • Ceramic shear sensing element • TEDS option • Waterproof IP68 integral cable option (up to 16 bar) • Conforming to ä Description Type 8763B… is an IEPE (Integrated Electronics Piezo-Electric) triaxial accelerometer allowing vibration measurements in x, y, and z axes. Type 8763B… uses Kistler shear element technology, assuring high immunity to base strain. The welded titanium construction provides a lightweight hermetic housing. An integral silicone cable option is available for waterproof vibration testing up to 16 bars. In addition to adhesive mounting, Type 8763B… has 3 x 5–40 threaded holes for flexible mounting options which also allows for calibration in each orthogonal axis. See PiezoStar triaxial Type 8766A… for high temperature 165°C [+330°F] and other frequency response options. Application Type 8763B… provides wide frequency response in each axis, ideal for dynamic vibration measurements, and is well-suited for lightweight structures. 8763B_000-928e-05.22 Dimensions are shown in in. [mm], unless otherwise noted. This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. © 2014 ... 2022 Kistler Instrument Corp., 75 John Glenn Dr., Amherst, NY 14228 Tel. 716-691-5100, sales.us@kistler.com, www.kistler.com. Kistler is a registered trademark of Kistler Holding AG. Kistler Group products are protected by various intellectual property

IEPE Triaxial Accelerometer - Miniature Ceramic Shear 50 ... 2 000 g, Type 8763B... <ISTLERmeasure, analyze, innovate.Technical data Type 1 g = 9.80665 m/s2, 1 in = 25.4 mm, 1 gram = 0.03527 oz, 1 Ibf-in = 0.113 N-m * TEDS Txx will increase Bias by 0.5 VDC nominally This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 2/5 © 2014 ... 2022 Kistler Instrument Corp., 75 John Glenn Dr., Amherst, NY 14228 Tel. 716-691-5100,...

IEPE Triaxial Accelerometer – Miniature Ceramic Shear 50 ... 2 000 g, Type 8763B… Temperature coefficient of sensitivity Page 3/5 This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. © 2014 ... 2022 Kistler Instrument Corp., 75 John Glenn Dr., Amherst, NY 14228 Tel. 716-691-5100, sales.us@kistler.com, www.kistler.com. Kistler is a registered trademark of Kistler Holding AG. Kistler Group products are protected by various intellectual...

IEPE Triaxial Accelerometer - Miniature Ceramic Shear 50 ... 2 000 g, Type 8763B... <ISTLERmeasure, analyze, innovate. Type 1756CxK04 Accessing TEDS Data Accelerometers with a "T" suffix are variant options which incorporate the TEDS 'Smart Sensor' design. Viewing an accelerometer's data sheet requires a TEDS compatible data acquisition system. The TEDS Interface provides a negative current excitation (reverse polarity) altering the operating mode of the PiezoSmart sensor, allowing the program editor software to read or add information contained in the memory chip. Mounting Reliable and...

IEPE Triaxial Accelerometer – Miniature Ceramic Shear 50 ... 2 000 g, Type 8763B… Optional Accessories • 5-40 stud to 10-32 stud, ground isolated mounting base • 5-40 stud to M6 stud, ground isolated mounting base • 5-40 stud, ground isolated adhesive mounting base Optional Accessories • 5-40 threaded hole, ground isolated adhesive mounting base • 5-40 threaded hole, magnetic mounting base Measuring Chains IEPE Sensor and Customer IEPE Compatible DAQ Measuring Acquiring IEPE Compatible Data Acquisition Unit (customer supplied) Laptop (customer supplied) IEPE Sensor and Kistler LabAmp...