4503B
12Pages

<ISTLER measure, analyze, innovate. Torque sensor Type 4503B... Type 4503B... torque sensors with built-in speed sensor operate on the strain gage principle. An integral, digital measurement conditioning system produces analog or digital output signals. • Rated torque: 0.2 ... 5 000 N-m • Ratio for second range: 1:10 or 1:5 of rated torque • Speed ranges up to 50 000 1/min • Accuracy class in standard measuring range: 0.05/0.1 in the extended measuring range: 0.1/0.2/0.4 • Integrated high resolution speed/angle measurement sensor up to 8 192 pulses/revolution as option • Serial data output RS-232C and USB interface Additional advantages of second range: • Freely selectable torque output frequency or voltage • One sensor for two separately calibrated measuring ranges Description The dual range sensor offers the advantage of freely scalable range switching, which allows highly accurate measurement of both the peak and particularly the operating torque. The sensor offers an integrated high resolution speed/angle measurement sensor up to 8 192 pulses/revolution, freely scalable. Additionally, the rotational direction as well as an absolute zero point (Z-line) are available. The voltage supply and the transmission of the measuring signals between the rotating shaft and the stator are contactless. Due to the low manufacturing tolerances and the high-quality balancing of the sensor, speed limits of up to 50 000 1/min can be achieved with the high-speed "H" version. Application The Type 4503B... torque sensors are used: • In automotive and vehicle engineering • In the aviation and aerospace industry • In mechanical and process plant engineering • In the development and production of electric motors They are universal in application, being suitable for the development laboratory, production or quality assurance. With a torque sensor Type 4503B... you will solve your measurement requirement. They are typically used for testing of electric motors, generators, drive performance, measurement of transmission or spindle drive friction, at a manual workstation or in networked, automated production cells. This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 1/12 © 2015 ... 2022 Kistler Group, EulachstraBe 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, info@kistler.com, www.kistler.com. Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com.

Torque sensor - with dual-range-option, Type 4503B... <ISTLERmeasure, analyze, innovate.Technical data Mechanical basic data This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 2/12 © 2015 ... 2022 Kistler Group, EulachstraBe 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, info@kistler.com, www.kistler.com. Kistler Group products are protected by various intellectual property rights. For more details visit www.kistler.com.

Torque sensor - with dual-range-option, Type 4503B... <ISTLERmeasure, analyze, innovate.Measurement features N-m Size/Rated torque Mnom Torque measuring system This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 3/12 © 2015 ... 2022 Kistler Group, EulachstraBe 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, info@kistler.com, www.kistler.com. Kistler Group products are protected by various intellectual property rights. For...

Torque sensor - with dual-range-option, Type 4503B... <ISTLERmeasure, analyze, innovate.General technical data N-m Size/Rated torque Mnom Version "L" + "W" (Low Speed) 11 The effects of permissible parasitic forces can be up to 1 % of nominal torque. Each type of irregular stress (Longitudinal or transverse force) is only permitted up to its specific load limit, provided none of the others will occur at the same time. If this condition is not met, the limit values must be reduced. If 50 % of Transverse load limit occur at the same time, only 50 % of Longitudinal load limit is permissible...

Torque sensor - with dual-range-option, Type 4503B... <ISTLERmeasure, analyze, innovate.Dimensions Type 4503B..., Measuring ranges 0.2 / 0.5 / 1 / 2 and 5 / 10 and 20 N-m Dimensions for mounting base (GU) Connecting dimensions for mounting base All dime n sions without tolerances comply with ISO 2768-mH This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 5/12 © 2015 ... 2022 Kistler Group, Eulachstrafte 22, 8408 Winterthur,...

Torque sensor – with dual-range-option, Type 4503B... interne und externe Fertigung Dimensions Type 4503B..., Measuring ranges 50 / 100 N∙m 90  = Option mounting base "GU" Fig. 2: Type 4503B... Size 3 All dimensions without tolerances comply with ISO 2768-mH 1 Option Zubehör Gehäuseunterbau "GU" Dimensions for mounting base (GU) Das Urheberrecht an dieser Zeichnung, die dem Empfänger persönlich anvertraut wird, verbleibt unserer Firma. Ohne unsere schriftliche Genehmigung darf die Zeichnung weder kopiert noch vervielfältigt, noch an Drittpersonen mitgeteilt oder zugänglich gemacht werden....

Torque sensor - with dual-range-option, Type 4503B... <ISTLERmeasure, analyze, innovate.Dimensions Type 4503B..., Measuring ranges 200 / 500 / 1 000 N-m Dimensions size 4 in mm Dimensions for mounting base (GU) Connecting dimensions for mounting base All dimensions without tolerances comply with ISO 2768-mH This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 7/12 © 2015 ... 2022 Kistler Group, Eulachstrafte 22, 8408 Winterthur,...