Hydrant Dispenser
4Pages

An interlock device is fitted, which keeps the vehicle braked when the coupler is not stowed on its place. N. 1 flexible intake hose, 10 metres long, ELAFLEX type HD 100 C of 4", type C, grade 2, complying to EN 1361 specifications, complete with threaded M and F 4" Spanlock connections. The hose is mounted on the perimeter part of the vehicle on proper supports. Special pivoting pads are mounted along the hose, in order to avoid the hose rubbing on the ground and to make the manoeuvrability easier. 2.3) N. 1 4"JM swivel joint, made of stainless steel, which is mounted to enable the right...

Spanlock connections. 6.4) N. 1 coupler for underwing refuelling with pressure regulator set at 45 psi (3,11 bar). 6.5) N. 1 stowage for the underwing coupler equipped with interlock system. 7) DELIVERY FROM THE PLATFORM 7.1) N. 1 4" ball valve to stop the delivery of the platform's hoses. 7.2) N. 1 4" swivel joints made of stainless-steel mod. JM. 7.3) N.1 hard pipe for fuel transfer to the deck. 7.4) N. 2 flexible hoses, 3,5 metres long, ELAFLEX HC 63 C of 2”V4, type C, grade 2, according to EN 1361 specifications, complete with threaded M and F 4" Spanlock connections. 7.5) N. 2 couplers...

HYDRANT DISPENSER Realizzati per assolvere opera-zioni di rifornimento in ambiti aeroportuali equipaggiati di rete idrante, da 1000 Ipm a 4000 Ipm. Progettati, realizzati e collaudati secondo i requisiti richiesti e gli standard internazionali nel risp-etto delle normative nazionali e internazionali. HYDRANT DISPENSER designed to perform refuelling operations within airport areas equipped with hydrant network, from 1000 to 4000 Ipm. Designed, manufactured and tested according to specific requirements and international standards, in compliance with national and international regulations....