Aircraft Refueller
12Pages

Aviorifornitori Aeroportuali Aircraft Refuellers Avitailleurs AapoflpoMHbie TonmiB03anpaBiMHKM

AIRCRAFT REFUELLER AV-45JM TECHNICAL SPECIFICATION GENERAL INFORMATION The aircraft refueller described in this specification is designed for under wing refuelling for any type of aircrafts. The vehicle design and configuration is with the possibility to have an elevating fuelling platform mounted immediately behind the driver's cab. The control station is located at the rear of the cab or platform, with the operative side on the left or right. All pipes are made of in stainless steel AISI304 and are sized to reduce pressure loss to a minimum. Pipe joints are flanged. Pipes are inert gas...

- Pneumatic device placed in the cab with a warning light for the P.T.O. engagement. - Supply and assembly of N. 1 P.T.O. to operate the fuel pump and hydraulic pump for the platform lifting and hose reel's rewinding. - Supply and fitting of N. 1 hydraulic oil reservoir fitted with a filling lid, level indicator, and valve for the emptying. - Oil filter on the return line. - Pneumatic device that keeps the vehicle stopped when the P.T.O is engaged. - The pneumatic equipment of the services is directly fed by the reservoirs of the tractor's services. - Mounting of a liquid fifth wheel to tow...

for the bottom loading. 4.3) The bottom loading of the tank is composed of: 4.3.1) N. 1 4"pressure balanced bottom valve for the bottom loading. 4.3.2) N. 1 sensitive unit that closes the bottom valve when the loading level is reached. 4.3.3) N. 2 2"V2 couplers, two on the left side and two flanged couplings on the right side for the bottom loading, 4.3.4) N. 2 pre-check valves, one on the right side and the other on the left side, in order to control the working of the overfill device. 4.3.5) N. 1 air plane couplers of 2'% provided with a 3"ball valve and a gauge, for fuel recirculation....

- Pulse transmitter. - Other options. 5.5.1) The pressure control and the function of the"dead-man"are performed by an automatic valve on "deadman" and Venturi line. 5.5.2) N. 3 Venturi with variable setting: mod. JM for delivery from the hose reels and from the platform. 5.5.3) A Venturi pressure gauge fitted with a test's cock. 5.5,4) Spiralled "deadman" cable, 15 m long, with handle. 5.6) DELIVERY FROM THE HOSE REELS 5.6.1) N. 2 3"ball valves to stop the delivery of the hose reels'hose. 5.6.2) N. 2 hose reels, single volute type, suitable to contain 30 m of 2"Vi flexible pipe. The hose...

JM JNtNTERPRl with interlock device. 5.8.1) N. 4 pneumatic valves at balanced pressure, to select the suction line of the hose reel's hoses or the deck hoses, of the valve to deliver to tank. The selection of the defuel-ing operation is done directly through the control panel, excluding automatically the refuelling operation. 5.9.1) The sampling/drainage pipes of inlet and outlet of the filter monitor terminate near the operative side, with ¥*" "APOLLO" ball valve with Camlock connections. 5,9.2) N. 2 sampling points connected at the inlet and outlet of the filter, fitted on the control...

- Safety device which avoids the quick lowering in case of pipes break down. - Access ladder. - Maximum height from the ground about 4,50 m, suitable for the refuelling of any kind of aircrafts (the max height of the platform can be set at any requested value up to 4,50 m). - It is possible for the platform to be positioned at any intermediate position. - N. 1 lifting and lowering control fitted on the platform. - The platform is operated through the hydraulic system. - N. 1 device to stop the vehicle, which keeps the vehicle braked when the platform is not completely lowered (interlock). -...

- The fuelling platform is lifted. - The delivery couplers are not stowed or the doors of the units are open. - The P.T.O. is engaged. - The bonding reel’s cable is not completely rewound. - The handrail of the tank is lifted. - The bottom loading couplers and the recycle are connected. A warning light is provided in the driver's cab and it goes on when the interlock is engaged. An override valve of the interlock system is provided. It can be sealed with lead. A red flashing light goes on when the system is overridden. 5.14.3)The following is provided: - N. 2 fire extinguisher holders with...

5,16.5) The gauges’pipes, which are in contact with the fuel, are made of stainless steel. 5.16.6) The piping of the pneumatic system are made of RILSAN. 5.16.7) N. 2 reglementary orange panels. 5.16.8) N. 3 labels for liquid flammables goods transportation, as per ADR rules 5,17) ANCILLARIES 5.17.1) n. 1 scissors ladder made of aluminium, height 2,2 metres, placed on the vehicle 5.17.2) N, 1 box made of stainless steel to contain the sampling bottles, placed on the right side near the delivery station. 5.18) PAINTING 5,18.1) The various components of aircraft refueller, cab included, are...

Progettati e realizzati per le operazioni di riforni-mento carburante agli aerei e agli elicotteri, idonei a operare a temperature ambientali da -40°C a +50°C. Cisterne di ogni capacita realizzate in acciaio inox o in lega leggera. Centreline di rlforni-mento con portate lino a 4000 Ipm. Piattaforma di rifornlmento elevabile idraulicamente e idonea a quaisiasi tipo di aereo. I nostri aviorifornitori sono realizzati in conformity con gli standard irrtemazio-nali e in base ai requisiti richiesti. Designed and manufactured for aircraft and helicopter refuelling operations, capable to operate...