Overview
The document provides detailed specifications and features of the JLG R2632 Scissor Lift, highlighting its economic benefits, productivity enhancements, and accessibility features.

Economic Benefits
- Lower Total Cost of Ownership.

Productivity Enhancements
- Optional AGM batteries boost efficiency.
- Improved uptime.

Accessibility Features
- Equipped with variable tilt technology to indicate working envelope and platform height limitations on slight side slopes.

Smart Design
- Reliable and simple active pothole protection.
- Steel platform and service trays for increased resistance.
- Wide-opening steel doors for easy access to batteries and components.

Standard Features
- 0.86 m roll-out deck extension, fold-down handrails, half swing gate, removable platform control box, lanyard attach points.
- Full proportional drive joystick control with integral thumb steer switch, proportional lift/lower speed control, joystick enable for lift and drive.
- Zero load sensing system, 4 x 6V 220 A/hr deep cycle batteries, automatic positive traction, programmable settings, on-board self-diagnostic testing.
- Swingout steel battery/electrical compartments doors, 27 amp automatic battery charger, front wheel hydraulic drive motors, dual wheel automatic brakes.
- Emergency brake release, active pothole protection system, AC cable to platform, battery charge level indicator, variable tilt indicator, hourmeter.
- Lubrication-free scissor arm bushings, scissor maintenance prop, manual descent, horn, non-marking solid tyres, lifting and tie down points, slope alarm and light.
- Fork lift pockets, mobile control, maintenance-free AGM batteries, all motion alarm, pipe racks, amber strobe light, anti-vandalism package.
- Multi-display indicator, ClearSky Locate, ClearSky CAN, drive motor covers, extension deployment handles, synthetic biodegradable hydraulic oil, SkySense levels 1 and 2, operator access control.

Model Specifications
- Tyres: Non-Marking Solid 406 x 127 mm
- Brakes: Multi-disc friction
- Drive: Hydraulic front-wheel
- Batteries: 4x 6V 220A/hr
- Charger: 24v @27Amp Automatic
- Pump Motor: 4.5kW
- Hydraulic System: 18L
- Hydraulic Reservoir Pump: Fixed displacement gear

Performance and Dimensions
- Working Height: 9.77 m
- Platform Height (Elevated): 7.77 m
- Stowed Height: 2.24 m
- Platform Height (Lowered): 1.11 m
- Platform Railing Height: 1.13 m
- Stowed Height (Rails Folded): 1.79 m
- Platform Size Inside: 0.65 m x 2.13 m
- Deck Extension: 0.86 m
- Overall Width: 0.81 m
- Overall Length: 2.40 m
- Wheelbase: 1.88 m
- Ground Clearance: 9.8 cm
- Platform Capacity (Indoor): 230 kg
- Platform Capacity (Outdoor): 125 kg
- Capacity on Deck Extension: 120 kg
- Lift/Lower Time (No Load): 56/42 sec.
- Maximum Drive Height: 6.4 m
- Machine Weight: 1,941 kg
- Maximum Ground Bearing Pressure: 6.47 kg/cm2
- Drive Speed (Lowered): 3.2 km/h
- Drive Speed (Elevated): 0.8 km/h
- Gradeability: 25%
- Turning Radius (Inside): 0.0 m
- Turning Radius (Outside): 2.22 m

Important Notes
- JLG reserves the right to make specification and/or equipment changes without prior notification.
- Specifications may change to meet country standards or with the addition of optional equipment.

Contact Information
JLG EMEA BV, Polaris Avenue 63, 2132 JH Hoofddorp, The Netherlands. Phone: +31 (0)23 565 5665. Website: www.jlg.com