Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. JAQUITH INDUSTRIES INC.
  3. L5023 - L5024 & L5026

L5023 - L5024 & L5026

L5023 - L5024 & L5026
1 / 2 PagesView full catalog

L5023 - L5024 & L5026

Product catalog summary
Overview: Jaquith Industries Inc provides an omni-directional breakaway support system designed for ground-mounted LIR masts, adhering to the 3-inch Frangibility rule. This system is particularly relevant for elevated equipment in the RSA (Runway Safety Area).
Specifications: The system utilizes fuse bolts that are compatible with 3/4” foundation anchor bolts. These are specifically designed for LIR MG-20 {L-5023}, MG-30, and MG-40 {L-5024} masts. Additionally, a 5/8” diameter option (L-5026) is available.
Compliance: The fuse bolts are approved by the FAA Airports ~ AAS-100 & ATO Office, ensuring they meet necessary safety and operational standards.
Product Variants: The document lists different sets of fuse bolts: L-5023 includes a set of four 0.75” diameter bolts, L-5024 includes a set of six 0.75” diameter bolts, and L-5026 includes a set of four 0.625” diameter bolts. Other sizes are available upon request.
Contact Information: For further inquiries or to request additional sizes, contact the Jaquith Sales Team at their Syracuse, NY office.
See more

Catalog excerpts

L5023 - L5024 & L5026-1

Frangible Mounting Fuse Bolts For Elevated Equipment in the RSA Omni-directional breakaway support system for ground mounted LIR masts where the 3 inch Frangibility rule is required. Fuse Bolts are allowed by FAA Airports ~ AAS-100 & ATO Office. Fuse bolts thread onto 3/4” foundation anchor bolts supplied by Jaquith for LIR MG-20 {L-5023}, MG-30 & MG-40 {L-5024} Masts. L-5026 5/8” dia also available. L-5023 4) .75” dia Fuse Bolt Set ** L5024 6) .75” dia Fuse Bolt Set ** L5026 4) .625” dia Fuse Bolt Set

 Open the catalog to page 1
L5023 - L5024 & L5026-2

Gary Rixmann/AWA/FAA AJW-46, Lighting Systems Group 11/02/2007 04:17 PM To Whom it May Concern cc bcc Subject Fw: "breakaway anchor bolts" acceptable for use in Runway Safety Area The "breakaway bolts" in the photo below have been third-party tested, evaluated by the FAA Technical Center and accepted by the FAA Airport Engineering Division (AAS-100) for use within the Runway Safety Area (RSA). This is the only breakaway anchor-bolt device that has been determined to satisfy the 3-inch frangible mounting requirement of Federal Aviation Regulations (FAR) Part 139; Paragraph 139.309(b)(4), The International...

 Open the catalog to page 2

All JAQUITH INDUSTRIES INC. catalogs and technical brochures

  1. L5015
    L5015

    1  Page

  2. L5018
    L5018

    1  Page

  3. L5004
    L5004

    1  Page

  4. L2763DME
    L2763DME

    2  Pages

  5. L9149
    L9149

    1  Page

  6. L5008 & L5009
    L5008 & L5009

    1  Page

  7. L5027
    L5027

    1  Page

  8. L5017FT
    L5017FT

    1  Page

  9. L5005
    L5005

    1  Page

  10. ASDE X Mounts
    ASDE X Mounts

    1  Page

  11. L9150
    L9150

    1  Page

  12. L5017
    L5017

    1  Page

  13. L-5000
    L-5000

    1  Page

  14. lir_option
    lir_option

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.