ITW GSE 7400 JetEx 28VDC

Product catalog summary

Overview: The ITW GSE 7400 JetEx is a battery-powered 28 VDC Ground Power Unit (eGPU) designed for flexibility and independence, ideal for hangars and remote use. It features a large battery capacity capable of up to 100 engine starts on a full charge and can be charged while delivering power to an aircraft.

Specifications:

Input: Charger power of 15 kW (3-phase) or 5 kW (1-phase), with input voltage ranges of 260–530 V (3-phase) and 170-300 V (1-phase).
Output: Continuous current of 600 A, engine start capability of 2400 A, and voltage regulation of less than 0.5% from no load to full load.
Weight: Approximately 740 kg (1630 lbs) without cables.
Environmental: Operating temperature from -10°C to 45°C, noise level below 65 dB(A) at 1m.

Design and Features:

Modular design for easy maintenance and repair, with no rotating parts, making it practically maintenance-free.
Weatherproof steel cabinet mounted on a pneumatic tire trailer for easy towing.
Adjustable voltage compensation via user interface, with features like Line Drop Compensation and Current Limit (300 to 2000 Amps).
Powered by a 40 kWh Li-ion battery pack, compliant with high safety regulations.

Standards and Compliance:

Complies with ISO 6858:2017(E), MIL-704F, EN 12312-20, EN 60204-1, EN 62040-1-1, EN 61558-2-6, EN 61000-6-2, EN 61000-6-4, and AHM 907.
Protection class IP55 for electronic section, with safeguards against over/under voltage, over temperature, and short circuits.

Applications: Suitable for aircraft such as Cessna Citation, Beechcraft, Gulfstream G250, Dassault FalconJet, ATR 42 & 72, and Bombardier Q Series / Dash 8.

Additional Features:

Common icon-based user interface for ease of use.
Options for output cables, input cable and plug specifications, towbar with DIN40 towing eye, and monitoring over GSM/GPS.

Catalog excerpts

Battery-powered Ground Power Unit Ideal for hangars and remote use PU Large battery capacity allowing numerous engine starts

Open the catalog to page 1

EXTREME FLEXIBILITY Single or 3-phase input voltage Ideal for hangar use. No direct emissions and low noise level On-Board Charging System Can supply power and recharge at the same time Mobile GPU and line-powered converter in one unit Recharge from any 50/60Hz standard socket INDEPENDENT AND POWERFUL The 28 VDC JetEx eGPU is independent due to the onboard battery. Powerful enough to perform up to 100 engine starts on a full charge, the 7400 JetEx is the ultimate in battery driven units. It can even be charged while delivering power to an aircraft. EQUALLY IDEAL FOR HANGAR AND REMOTE USE Quiet...

Open the catalog to page 2

A WELL-PROVEN SOLUTION INNOVATIVE eGPU – BUILT ON KNOWN TECHNOLOGIES The JetEx eGPU is powered by a battery pack based on state-of-the-art Li-ion technology and with a capacity of 40 kWh. It is designed to comply with the highest safety regulations and quality requirements. At the output of the eGPU is ITW GSE‘s tried and tested 28 VDC solid-state converter. This combination of well-proven technologies has created the rock-solid eGPU with enough power to perform up to 100 engine starts on a full charge. BATTERY PACK INPUT ENERGY SUPPLY based on tested battery packs. SAME EASY-TO-USE PLATFORM...

Open the catalog to page 3

SPECIFICATIONS ITW GSE 7400 JetEx mobile 28 VDC eGPU Options Output cables upon request Standard Features/Equipment • Beacon* for operation/charging • Beacon* for warning/ low battery incl. sirene *Color: specify yellow,blue,red or green • Simultaneous charging while supplying 28 VDC power Standard Options Available • Input cable and plug according to clients specifications • Towbar with DIN40 towing eye • Monitoring over GSM/GPS Dimensions are shown in mm and [inches] Specifications are subject to change without prior notice Protection • Protection class: IP55 (electronic section) • Over/under...

Open the catalog to page 4

ITW GSE 7400 JetEx 28VDC

ITW GSE 7400 JetEx 28VDC

Catalog excerpts

All ITW GSE catalogs and technical brochures