ITW GSE 1400 28 VDC GPU

Product catalog summary

Overview
The ITW GSE 1400 is a compact and powerful solid-state Ground Power Unit (GPU) designed for ease of maneuverability and minimal space requirements. It is available in both mobile and fixed configurations. The solid-state technology ensures minimal wear and tear due to the absence of rotating parts, enhancing reliability and longevity. The unit features removable side panels for easy access during maintenance or repairs.

User Interface
The GPU is equipped with an intuitive, icon-based operator interface common across ITW GSE products. It simplifies operation to a single start/stop button, while allowing monitoring of parameters like voltage and current. A deeper interface level is available for technicians for setup and maintenance.

Specifications

Input: Frequency of 50/60 Hz with a 6-pulse rectification and a power factor of 0.91.
Output: Continuous current of 600 A (optionally limited to 400 A), with an engine start capability of 28 V @ 2000A. Voltage regulation is less than 0.5% from no load to full load.
Weight: Approximately 120 kg for fixed units and 240 kg for mobile units.
Efficiency: Overall efficiency of 0.87, with standby losses of 130W and no-load losses of 330W.
Environmental: Operating temperature range from -40°C to +56°C, with a noise level below 65 dB(A) at 1 meter.
Protection: IP55 protection class, with safeguards against over/under voltage, over temperature, internal voltage errors, and short circuits.

Options and Standards
Optional cables are available upon request. The GPU complies with several norms and standards, including ISO 6858:2017(E), BS 2G 219, MIL-704F, and various EN standards for safety and EMC.

Dimensions
The document provides detailed dimensions for both fixed and mobile versions, with measurements in millimeters and inches.

Catalog excerpts

Small and powerful solid-state GPU 600 A (400 A optional) LOOKING FOR A SMALL POWERFUL UNIT? The ITW GSE 1400 solid-state GPU is the answer. It is easy to maneuver and not space demanding neither as a mobile nor as a fixed unit. The solid-state technology means that wear and tear is limited to a minimum since there are no rotating parts. The result is a very reliable and dependable unit that is built to last for a long time. In case of service or repair, the side panels can be completely removed within minutes, thus leaving access to all vital parts. INTUITIVE AND EASY-TO-USE INTERFACE The icon based operator interface is common for all ITW GSE products. It is easy and intuitive and guarantees you correct operation. The daily operator only has to press the combined start/stop button – nothing more. But he can monitor various parameters such as voltage and current at the display screen. For set-up and maintenance purposes, there is a deeper level dedicated for the technician. The ITW GSE 1400 solid-state GPU is ready to provide power as soon as it is connected to the mains supply and the start button is activated!

Open the catalog to page 1

SPECIFICATIONS ITW GSE 1400 28 VDC Ground Power Unit Frequency: 50/60 Hz 5% Rectification: 6 pulse Power factor: 0.91 Inrush current: None, soft start Output • Current: 600 A continuously (can be limited to 400 A upon request) • Engine Start Capability: 28 V @ 2000A • Voltage: 28 VDC (or as adjusted) • Ripple: less than 2% at full load • Voltage regulation: <0.5% from no load to full load • Voltage compensation: 3 V @ 600 A Manual or voltage feed-back via interlock Weight • Fixed unit approx. 120 kg (265 lbs.) • Mobile unit approx. 240 kg (529 lbs.) Efficiency • Overall efficiency: 0.87 • Stand...

Open the catalog to page 2

ITW GSE 1400 28 VDC GPU

ITW GSE 1400 28 VDC GPU

Catalog excerpts

All ITW GSE catalogs and technical brochures