Infrared sensors 9xxxx 9KT01, 9KT04
12Pages

Technical Documentation of the Fourth Generation Part: Infrared sensors 9xxxx 9KT01, 9KT04 English Version pdf-file of the online documentation dated on the 03/26/09 Table of contents: Infrared sensors 9xxxx 1 Description of sensors Sensor type 9KT01 Sensor type 9KT01: Detection range Sensor type 9KT01: Technical data Sensor type 9KT01: Technical drawing Sensor type 9KT04 Sensor type 9KT04: Detection range Sensor type 9KT04: Technical data Sensor type 9KT04: Technical drawing

1 Description of sensors In 1993, the first sensors were tested in practice, and since then they have been continuously improved. Since 2004, the sensors 9xxxx (9KT01, 9KT02...) have been produced by iris-GmbH. The sensors 9xxxx contain a passive and an active component, an A/D transformer and a serial interface. The passive component consists of a pyroelectric detector with 6 individual detector elements. The detector is a receiver being sensitive in the infrared wave range from 9 to 12 µm. Every body emits thermal radiation corresponding to its temperature. The wave range from 9 to 12 µm...

Photo of the sensor 9KT01, scale approx. 1:2 • This sensor has a shielded, 1m long, halogen-free cable prepared with a circular connector. o The cable meets the following specification: Cable length: 1m (90...110cm) Halogen-freedom according to DIN VDE 0472 part 815 Corrosiveness of the combustion gases: DIN EN 50267 is met (substitute of DIN VDE 0472 part 813) o Data of the circular connector: Pinout according to DIN 45326 Socket, 8 poles Metal housing, screw plug For connecting this sensor to the analyzer A21S-2 or A21S-2-GLORIA, an additional cable is required. The cable identification...

Sensor type 9KT01: Detection range In the following, the detection range of the sensor type 9KT01 is shown with its two curtains • • for a narrow door and for a wide door. On the left side, the detection range of the passive component of the sensor, and on the right side, the detection range of the active component of the sensor is shown in three views: 1. The upper views show the detection range of the sensor from the side. 2. The central views show the detection range of the sensor from outside (view on the door). 3. The lower views show the detection range of the sensor from above (view...

Detection range of the sensors 9KT01 at a wide door(the element combination Z is shown) Passive component of the sensor Active component of the sensor

Sensor type 9KT02: Technical data Power supply Ambient temperature in operation Storing temperature Relative humidity Electromagnetic emission depending on the used analyzer type Immunity to electromagnetic disturbance depending on the used analyzer type Classification of mechanical environmental conditions class 5M2 according to EN 60721 part 3-5 (without impacts from foreign bodies) class 1, Category A according to EN 61373 Protective system Estimated MTBF by means of two nylon screws M4x20 Drilling template Laser safety class The sensor contains diodes of class 1 according to EN 60825-1

Sensor type 9KT01: Technical drawing Sensor type 9KT01, scale approx. 1:1

Photo of the sensor 9KT04, scale approx. 1:2 • • This sensor has a shielded, 5m long PVC-containing cable prepared with a Micro-D-Subconnector. For connecting this sensor to the analyzer A21S-2 or A21S-2-GLORIA, no additional cable is required. => However, extension cables are not provided either. The photo shows on the left the cable of the sensor 9KT04 with Micro-D-Sub-connector on the right the analyzer A21S-2 with Micro-D-Sub-connector. The maximum cable length between analyzer A21S-2 or A21S-2-GLORIA and sensor (including the cable at the sensor) amounts to 15m. This sensor has been...

Sensor type 9KT04: Detection range In the following, the detection range of the sensor type 9KT04 is shown with its two curtains • • for a narrow door and for a wide door. On the left side, the detection range of the passive component of the sensor, and on the right side, the detection range of the active component of the sensor is shown in three views: 1. The upper views show the detection range of the sensor from the side. 2. The central views show the detection range of the sensor from outside (view on the door). 3. The lower views show the detection range of the sensor from above (view...

Detection range of the sensors 9KT04 at a wide door (the element combination Z is shown) Passive component of the sensor Active component of the sensor

Sensor type 9KT04: Technical data Power supply Ambient temperature in operation Storing temperature Relative humidity Electromagnetic emission depending on the used analyzer type Immunity to electromagnetic disturbance depending on the used analyzer type Classification of mechanical environmental conditions class 5M2 according to EN 60721 part 35 (without impacts from foreign bodies) class 1, category A according to EN 61373 Protective system Estimated MTBF by means of two nylon screws M4x20 Drilling template Laser safety class The sensor contains diodes of class 1 according to EN 60825-1 e

Sensor type 9KT04: Technical drawing Sensor type 9KT04, scale approx. 1:1